Let`s talk about Linux...

Использование и настройка AIDE.

2009-12-28T22:39:00.000-08:00

1. Установка пакета aide-0.11-1.2.el4.rf.i386.rpm
2. Правка конфигурационного файла /etc/aide.conf по типу:
/etc p+i+u+g
!/etc/mtab
3. Создание снимка указанной ф.с:
# aide --init
4. Копируем базу из /var/lib/aide/aide.db.new.gz в /var/lib/aide/aide.db.gz
5. Создаём скрипт проверки:
#!/bin/bash
ReportDir=/usr/local/stat/report
LogFile=/var/log/aide.log
Hostname="www"
Mail='unix@domain.kz'
Date=`date '+%Y-%m-%d'`
cd $ReportDir
/usr/sbin/aide --check
SZ=`ls -l /var/log/aide.log | awk {'print $5'}`;
if [ $SZ -eq 0 ]; then
/bin/logger -p local0.info "Integrity Check was succesfull complete. Nothing changes."
else
# service sendmail start; sleep 15;
mail -s "Integrity Checking Warning from ${HOSTNAME}" $Mail < $LogFile # sleep 15; service sendmail stop; fi exit 0 6. Далее можно сделать снапшот системы и забакапить его на CD к примеру, для дальнейшей сверки в случае непрошенного вторжения:
# mkisofs -V Aide_DB`date +%F` -J -R -o aide.iso /Aide/directory
# cdrecord -v -eject aide.iso

Всё! Всем удачи и целостности в НГ !!!

Курсы по Linux

2009-10-27T21:53:00.000-07:00

Провел курсы по Линукс. Начального уровня. В компании ElsiTech.
Остался очень доволен, планирую сдать в этом году RHCE и в 2010 провести курсы второго уровня по сетевым службам. Если кому интересно послушать или поделиться опытом по проведению курсов, добро пожаловать!...

Измышлизмы

2009-09-28T03:38:00.000-07:00

Пишу для всех... Пишу обо всём... Пишу то что слышал или читал, и то что по жизни считаю схожим моему мнению. Возможно тут будет много чужих слов, перефразированных или написанных по памяти с ошибками, но надеюсь что от этого ценность их не уменьшиться, а может даже и наоборот... Вобщем решил весь этот коломбур обозначить словом - измышлизмы !... Добро пожаловать! :)
ЗЫ
Конечно же посвящается моей дочери, и очень надеюсь на то что она когда либо прочтёт это, и сделает для себя правильные выводы которые помогут ей в жизни.

Думаю первое с чего можно начать это филосовская фраза Джимми Хендрикса :

"Когда власть любви превзойдёт любовь к власти, настанет Мир на Земле"

Дети ничем не обязаны родителям, а родители обязаны детям всем.

Не суди и судим не будешь.

Умение говорить ценится высоко... а умение слушать ещё больше.

Жизнь - это когда с нами происходит не то, что мы запланировали.

Афоризмы Альберта Энштейна:

Бесконечны лишь Вселенная и глупость человеческая, при этом относительно бесконечности первой из них у меня имеются сомнения.

Благоприятная возможность скрывается среди трудностей и проблем.

Воображение важнее, чем знание.

Все знают, что это невозможно. Но вот приходит невежда, которому это неизвестно - он-то и делает открытие.

Достойна только та жизнь, которая прожита ради других людей.

Единственный разумный способ обучать людей - это подавать им пример.

Если вы хотите вести счастливую жизнь, вы должны быть привязаны к цели, а не к людям или к вещам.

Истина - это то, что выдерживает испытание опытом.

Истинная ценность человека определяется тем, насколько он освободился от эгоизма и какими средствами он этого добился.

Настоящий прогресс человечества зависит не столько от изобретательного ума, сколько от сознательности.

Не знаю, каким оружием будут сражаться в третьей мировой войне, но в четвертой в ход пойдут дубинки и камни.

Невозможно решить проблему на том же уровне, на котором она возникла. Нужно стать выше этой проблемы, поднявшись на следующий уровень.

Никакая цель не высока настолько, чтобы оправдывала недостойные средства для ее достижения.

Стремись не к тому, чтобы добиться успеха, а к тому, чтобы твоя жизнь имела смысл.

Тот, кто хочет видеть результаты своего труда немедленно, должен идти в сапожники.

Ты никогда не решишь проблему, если будешь думать так же, как те, кто ее создал.

Воображение это всё . Это предварительный показ предстоящих событий в жизни.
---

Unicode

2009-06-11T22:03:00.001-07:00

Русский шрифт в /etc/rc.d/rc.font

#!/bin/sh
#
# This selects your default screen font from among the ones in
# /usr/share/kbd/consolefonts.
#
unicode_start LatArCyrHeb-16
for i in 1 2 3 4 5 6;do
 echo -ne "\033%G" >/dev/tty$i
done

Примечание: если вам понравился шрифт, который стоял по-умолчанию, вместо LatArCyrHeb-16 пропишите cyr-sun16

Раскладка клавиатуры в /etc/rc.d/rc.keymap

#!/bin/sh
# Load the keyboard map.  More maps are in /usr/share/kbd/keymaps.
if[ -x /usr/bin/loadkeys ]; then
 /usr/bin/loadkeys /usr/share/kbd/keymaps/i386/qwerty/ru-utf.map.gz
fi

Локаль в /etc/profile.d/lang.sh

#!/bin/sh
# Set the system locale. (no, we don't have a menu for this ;-)
# For a list of locales which are supported by this machine, type:
# locale -a

# en_US is the Slackware default locale:
#export LANG=en_US
export LANG=ru_RU.UTF-8

# 'C' is the old Slackware (and UNIX) default, which is 127-bit
# ASCII with a charmap setting of ANSI_X3.4-1968. These days,
# it's better to use en_US or another modern $LANG setting to
# support extended character sets.
#export LANG=C

# There is also support for UTF-8 locales, but be aware that
# some programs are not yet able to handle UTF-8 and will fail to
# run properly. In those cases, you can set LANG=C before
# starting them. Still, I'd avoid UTF unless you actually need it.
#export LANG=en_US.UTF-8

# Another option for en_US:
#export LANG=en_US.ISO8859-1

# One side effect of the newer locales is that the sort order
# is no longer according to ASCII values, so the sort order will
# change in many places. Since this isn't usually expected and
# can break scripts, we'll stick with traditional ASCII sorting.
# If you'd prefer the sort algorithm that goes with your $LANG
# setting, comment this out.
export LC_COLLATE=C

# End of /etc/profile.d/lang.sh

и /etc/profile.d/lang.csh

#!/bin/csh
# Set the system locale. (no, we don't have a menu for this ;-)
# For a list of locales which are supported by this machine, type:
# locale -a

# en_US is the Slackware default locale:
##setenv LANG en_US
setenv LANG ru_RU.UTF-8

# Another option for en_US:
#setenv LANG en_US.ISO8859-1

# End of /etc/profile.d/lang.csh

Bases

2009-06-10T21:02:00.000-07:00

1.MySql
#mysql -u user -ppass base_name <> base_dump.sql #export
#mysqlshow -u user -ppass #show bases
Flash password RH:
#mysqld_safe --skip-grant-tables --user=root &
#mysql -u root
mysql> UPDATE mysql.user SET Password=PASSWORD('newpwd‘) WHERE User=’root’;
mysql> FLUSH PRIVILEGES;
Show DB:
#mysql> show databases;
Clead DB:
#mysql> drop database basename;

Commands_2

2009-05-04T04:35:00.000-07:00

Список основных команд Linux. Все команды тестировались на Fedora и Ubuntu.

Команда		Описание
•	apropos whatis	Показать команды соответствующие строке. См. также threadsafe
•	man -t man \| ps2pdf - > man.pdf	Создать pdf версию страницы мануала (man)
	which command	Показать полный путь к файлу команды
	time command	Выполнить команду и отобразить время выполнения
•	time cat	Запустить секундомер. Ctrl-d чтобы остановить его. См. также sw
•	nice info	Запустить команду с низким приоритетом (”info” reader в данном случае)
•	renice 19 -p $$	Установить shell (скрипту) низкий приоритет. Используется для неинтерактивных задач.
Навигация по директориям
•	cd -	Перейти в предыдущую директорию
•	cd	Перейти в $HOME директорию
	(cd dir && command)	Перейти в директорию, выполнить комманду (command) и вернуться в текущую директорию
•	pushd .	Положить текущую директорию в стек, чтобы позже вернуться к ней с помощью popd
Поиск файлов
•	alias l='ls -l --color=auto'	Быстрое отображение содержимого директории
•	ls -lrt	Список файлов по дате. См. также newest и find_mm_yyyy
•	ls /usr/bin \| pr -T9 -W$COLUMNS	Напечатать в 9 столбцов в ширину терминала
	find -name '*.[ch]' \| xargs grep -E 'expr'	Искать ‘expr’ в текущей директории и в нижестоящих директориях. См. также findrepo
	find -type f -print0 \| xargs -r0 grep -F 'example'	Поиск всех файлов по ‘example’ в текущей директории и ниже
	find -maxdepth 1 -type f \| xargs grep -F 'example'	Поиск всех файлов по ‘example’ в текущей директории
	find -maxdepth 1 -type d \| while read dir; do echo $dir; echo cmd2; done	Обработать каждый элемент с несколькими командами (в цикле while)
•	find -type f ! -perm -444	Найти файлы, которые не являются видимыми для всех (полезно для веб сайта)
•	find -type d ! -perm -111	Найти директории не доступные для всех (полезно для web сайтов)
•	locate -r 'file[^/]*\.txt'	Искать в кешированном индексе по именам.
•	look reference	Быстрый поиск (сортированный) словаря по префиксу
•	grep --color reference /usr/share/dict/words	Подсвечивание мест где регулярное выражение появляется в словаре
Архивирование и сжатие
	gpg -c file	Зашифровать файл
	gpg file.gpg	Расшифровать файл
	tar -c dir/ \| bzip2 > dir.tar.bz2	Заархивировать директорию (папку) dir/
	bzip2 -dc dir.tar.bz2 \| tar -x	Разархивировать архив (используйте gzip вместо bzip2 для файлов tar.gz)
	tar -c dir/ \| gzip \| gpg -c \| ssh user@remote 'dd of=dir.tar.gz.gpg'	Создать зашифрованный архив директории (папки) dir/ на удаленном компьютере
	find dir/ -name '*.txt' \| tar -c --files-from=- \| bzip2 > dir_txt.tar.bz2	Создать архив для папки dir/ и всех вложенных папок
	find dir/ -name '*.txt' \| xargs cp -a --target-directory=dir_txt/ --parents	Создать копию папки dir/ с вложенными папками
	( tar -c /dir/to/copy ) \| ( cd /where/to/ && tar -x -p )	Скопировать (с правами доступа) папку copy/ в папку /where/to/
	( cd /dir/to/copy && tar -c . ) \| ( cd /where/to/ && tar -x -p )	Скопировать (с правами доступа) содержимое папки copy/ в /where/to
	( tar -c /dir/to/copy ) \| ssh -C user@remote 'cd /where/to/ && tar -x -p'	Скопировать (с правами доступа) папку copy/ на удаленный компьютер remote:/where/to
	dd bs=1M if=/dev/sda \| gzip \| ssh user@remote 'dd of=sda.gz'	Сделать резервную копию (сбекапить) жесткого диска и послать ее на удаленный компьютер
rsync (Эффективный сетевой копировщик файлов: Используйте опцию –dry-run для тестирования)
	rsync -P rsync://rsync.server.com/path/to/file file	Только отобразить различия. Делайте много раз чтобы проверить прошли ли нормально закачки
	rsync --bwlimit=1000 fromfile tofile	Скопировать локально с предельной скоростью. Это приятно для I/O
	rsync -az -e ssh --delete ~/public_html/ remote.com:'~/public_html'	Зеркальный веб сайт (используется шифрование и дешифрование)
	rsync -auz -e ssh remote:/dir/ . && rsync -auz -e ssh . remote:/dir/	Синхронизировать текушую папку с папкой на удаленном компьютере
ssh (Secure SHell)
	ssh $USER@$HOST command	Запустить команду command на удаленном хосте $HOST от имени пользователя $USER (команда по умолчанию = shell)
•	ssh -f -Y $USER@$HOSTNAME xeyes	Запустить GUI команду на удаленном хосте $HOST от имени пользователя $USER
	scp -p -r $USER@$HOST: file dir/	Скопировать папку dir/ с правами доступа в домашнию папку пользователя $USER на хосте $HOST
	ssh -g -L 8080:localhost:80 root@$HOST	Перенаправить соединения к $HOSTNAME:8080 наружу к $HOST:80
	ssh -R 1434:imap:143 root@$HOST	Перенаправить соединения от $HOST:1434 к внутр. imap:143
wget (многоцелевой инструмент для скачивания)
•	(cd cli && wget -nd -pHEKk http://www.pixelbeat.org/cmdline.html)	Сохранить веб страницу (как она открывается локально) в текущую директорию
	wget -c http://www.example.com/large.file	Продолжить скачивание частично скаченного файла
	wget -r -nd -np -l1 -A '*.jpg' http://www.example.com/	Скачать множество файлов в текущую директорию
	wget ftp://remote/file[1-9].iso/	Ftp непосредственная поддержка globbing
•	wget -q -O- http://www.pixelbeat.org/timeline.html \| grep 'a href' \| head	Отображать вывод напрямую (на экран)
	echo 'wget url' \| at 01:00	Скачать url в 01:00 в текущую директорию
	wget --limit-rate=20k url	Сделать закачку с уменьшенной скоростью (ограничить скорость до 20 КB/s в этом примере)
	wget -nv --spider --force-html -i bookmarks.html	Проверить ссылки в файле
	wget --mirror http://www.example.com/	Оперативно обновлять локальную копию сайта (удобно использовать с cron)
Сетевые команды (Обратите внимание, что команды ifconfig, route, mii-tool, nslookup устарели)
	ethtool eth0	Отобразить статус сетевого устройства (интерфейса) eth0
	ethtool --change eth0 autoneg off speed 100 duplex full	Вручную установить скорость сетевого интерфейса (устройства)
	iwconfig eth1	Отобразить статус беспроводного интерфейса (устройства) eth1
	iwconfig eth1 rate 1Mb/s fixed	Вручную установить скорость беспроводного интерфейса (устройства)
•	iwlist scan	Список беспроводных сетей в радиусе действия
•	ip link show	Список сетевых интерфейсов (устройств)
	ip link set dev eth0 name wan	Переименовать интерфейс (устройство) eth0 в wan
	ip link set dev eth0 up	Включить интерфейс eth0 (чтобы выключить - down)
•	ip addr show	Список ip адресов интерфейсов
	ip addr add 1.2.3.4/24 brd + dev eth0	Добавить (или удалить) ip адрес и маску (255.255.255.0)
•	ip route show	Вывести таблицу маршрутизации
	ip route add default via 1.2.3.254	Установить 1.2.3.254 в качестве шлюза по умолчанию
•	tc qdisc add dev lo root handle 1:0 netem delay 20msec	Добавить 20мс латентность к устройству loopback (для тестирования)
•	tc qdisc del dev lo root	Убрать латентность добавленную выше
•	host pixelbeat.org	Поиск ДНС ip адреса по имени хоста или наоборот
•	hostname -i	Поиск локального ip адреса (идентично host ‘hostname’)
•	whois pixelbeat.org	Поиск whois информации по имени хоста или ip адресу
•	netstat -tupl	Список интернет сервисов в системе
•	netstat -tup	Список активных соединений к системе (от системы)
Сетевые команды связанные с windows (Обратите внимание, что samba - это пакет который предоставляет всю windows специфичную поддержку сети)
•	smbtree	Найти windows компьютеры в сети. См. также findsmb
	nmblookup -A 1.2.3.4	Найти windows (netbios) имя, ассоциируемое с ip адресом
	smbclient -L windows_box	Список shares на windows компьютере или samba сервере
	mount -t smbfs -o fmask=666,guest //windows_box/share /mnt/share	Смонтировать windows share (папку с открытым доступом)
	echo 'message' \| smbclient -M windows_box	Послать popup сообщение на windows комьютер (отключено по умолчанию в XP sp2)
Манипуляции с текстом (Обратите внимание, sed использует stdin и stdout, так что если Вы хотите редактировать файлы, добавляйте newfile)
	sed 's/string1/string2/g'	Заменить строку string1 строкой string2
	sed 's/$.*$1/\12/g'	Изменить строку anystring1 на anystring2
	sed '/ #/d; /^ $/d'	Убрать комментарии и пустые строки
	sed ':a; /\\$/N; s/\\\n//; ta'	Соединить строки (линии) с предшествующим \
	sed 's/[ \t]*$//'	Удалить предшествующие пробелы с строк
	sed 's/$[\\`\\"$\\\\]$/\\\1/g'	Заескейпить активные метасимволы оболочки двумя ковычками
•	seq 10 \| sed "s/^/ /; s/ *$.\{7,\}$/\1/"	Выровнять числа по правой границе
	sed -n '1000p;1000q'	Напечатать 1000-ную строку
	sed -n '10,20p;20q'	Напечатать строки с 10 по 20-ую
	sed -n 's/.$.$.*/\1/ip;T;q'	Получить title из HTML страницы
	sort -t. -k1,1n -k2,2n -k3,3n -k4,4n	Отсортировать IPV4 ip адреса
•	echo 'Test' \| tr '[:lower:]' '[:upper:]'	Перевести из одного регистра в другой
•	tr -dc '[:print:]' < /dev/urandom	Отфильтровать не печатаемые символы
•	history \| wc -l	Посчитать число строк
Операции с множествами (Обратите внимание, что Вы можете export LANG=C для скорости. Это также полагает отсутствие линий дупликатов в файле)
	sort file1 file2 \| uniq	Объединение неотсортированных файлов
	sort file1 file2 \| uniq -d	Пересечение неотсортированных файлов
	sort file1 file1 file2 \| uniq -u	Разность неотсортированных файлов
	sort file1 file2 \| uniq -u	Симметрическая разность неотсортированных файлов
	join -a1 -a2 file1 file2	Объединение отсортированных файлов
	join file1 file2	Пересечение отсортированных файлов
	join -v2 file1 file2	Разность отсортированных файлов
	join -v1 -v2 file1 file2	Симметрическая разность отсортированных файлов
Математические операции
•	echo '(1 + sqrt(5))/2' \| bc -l	Простая математика (Вычисление числа φ). См. также bc
•	echo 'pad=20; min=64; (10010^6)/((pad+min)8)' \| bc	Более сложная (целая). Этот пример показывает максимум FastE packet rate
•	echo 'pad=20; min=64; print (100E6)/((pad+min)*8)' \| python	Питон занимается математическими вычислениями
•	echo 'pad=20; plot [64:1518] (100106)/((pad+x)8)' \| gnuplot -persist	Напечатать FastE packet rate против packet size
•	echo 'obase=16; ibase=10; 64206' \| bc	Конвертация систем счисления (десятичную в шестнадцатиричную)
•	echo $((0x2dec))	Конвертация систем счисления (шестнадцатиричную в десятичную) ((арифметическое расширение shell-а))
•	units -t '100m/9.69s' 'miles/hour'	Unit конвертация (метрической системы в имперскую)
•	units -t '500GB' 'GiB'	Unit конвертация (SI в IEC префиксы)
•	units -t '1 googol'	Поиск определения
•	seq 100 \| (tr '\n' +; echo 0) \| bc	Добавить столбец чисел. См. также add и funcpy
Календарь
•	cal -3	Отобразить календарь
•	cal 9 1752	Отобразить календарь для конкретного месяца года
•	date -d fri	Какая дата у текущей пятницы. См. также day
•	[ $(date -d "tomorrow" +%d) = "01" ] \|\| exit	Завершить выполнение скрипта, если только сейчас не последний день месяца
•	date --date='25 Dec' +%A	Какого числа будет рождество в текущем году
•	date --date='@2147483647'	Перевести секунды прошедшие с epoch (1970-01-01 UTC) в дату
•	TZ=':America/Los_Angeles' date	Сколько времени сейчас на Западном побережье США (используйте tzselect чтобы найти TZ)
	echo "mail -s 'get the train' P@draigBrady.com < /dev/null" \| at 17:45	Напоминать по Email
•	echo "DISPLAY=$DISPLAY xmessage cooker" \| at "NOW + 30 minutes"	Напоминать в Popup окне
Locales (локализация)
•	printf "%'d\n" 1234	Напечатать четырехзначное число сгруппированное соответственно локали
•	BLOCK_SIZE=\'1 ls -l	Сделать чтобы ls группировала тысячи соответственно локали
•	echo "I live in `locale territory`"	Получить информацию из базы данных локали
•	LANG=en_IE.utf8 locale int_prefix	Искать информацию о локали для конкретной страны См. также ccodes
•	locale \| cut -d= -f1 \| xargs locale -kc \| less	Список полей, доступных в базе данных локали
Перекодирование (команды iconv, dos2unix, unix2dos устарели)
•	recode -l \| less	Отобразить доступные переходы (по 1 алиасу на каждой строке)
	recode windows-1252.. file_to_change.txt	Перевести Windows “ansi” в локальную (текущую) кодировку (auto делает CRFL перевод)
	recode utf-8/CRLF.. file_to_change.txt	Перевести windows utf8 в локальную (текущую) кодирувку
	recode iso-8859-15..utf8 file_to_change.txt	Перевести из кодировки latin9 (западная европейская) в utf8
	recode ../b64 <> file.b64	Кодирование base64
	recode /qp.. <> file.qp	Раскодирование с кавычками
	recode ..HTML <> file.html	Перевести text в HTML
•	recode -lf windows-1252 \| grep euro	Поиск в таблице символов
•	echo -n 0x80 \| recode latin-9/x1..dump	Показать символ в кодировке latin9 по коду
•	echo -n 0x20AC \| recode ucs-2/x2..latin-9/x	Показать latin-9 encoding
•	echo -n 0x20AC \| recode ucs-2/x2..utf-8/x	Показать utf-8 encoding
CDs (операции с CD дисками)
	gzip < /dev/cdrom > cdrom.iso.gz	Сохранить копию CD с данными
	mkisofs -V LABEL -r dir \| gzip > cdrom.iso.gz	Создать образ CD диска из содержимого директории
	mount -o loop cdrom.iso /mnt/dir	Смонтировать CD образ на /mnt/dir (только для чтения)
	cdrecord -v dev=/dev/cdrom blank=fast	Очистить CDRW
	gzip -dc cdrom.iso.gz \| cdrecord -v dev=/dev/cdrom -	Записать CD образ (используйте dev=ATAPI -scanbus для выбора устройства записи)
	cdparanoia -B	Сохранить аудио треки с CD в wav файлы (сохранятся в текущую папку)
	cdrecord -v dev=/dev/cdrom -audio *.wav	Создать аудио диск (audio CD) из всех wav файлов, находящихся в текущей директории (см. также cdrdao)
	oggenc --tracknum='track' track.cdda.wav -o 'track.ogg'	Создать ogg файл из wav файла
Дисковое пространство (См. также FSlint)
•	ls -lSr	Список файлов, отсортированных по размеру (файл с наибольшим размером - последний)
•	du -s * \| sort -k1,1rn \| head	Показать пользователей в текущей папке с наибольшим объемом используемых данных. См. также dutop
•	df -h	Показать свободное место на смонтированных файловых системах
•	df -i	Показать свободные индексные дескрипторы на смонтированных файловых системах
•	fdisk -l	Показать размеры разделов дисков и типы (запускается от root-а)
•	rpm -q -a --qf '%10{SIZE}\t%{NAME}\n' \| sort -k1,1n	Список всех пакетов с размером дистрибутивов (размер - в Байтах)
•	dpkg-query -W -f='${Installed-Size;10}\t${Package}\n' \| sort -k1,1n	Список всех пакетов с размерами установки (размер - в килобайтах) для debian дистрибутивов
•	dd bs=1 seek=2TB if=/dev/null of=ext3.test	Создать большой тестовый файл. См. также truncate
Мониторинг/отладка
•	tail -f /var/log/messages	Мониторинг сообщений в log файле
•	strace -c ls >/dev/null	Сумма/профиль системных вызовов, сделанных командой
•	strace -f -e open ls >/dev/null	Список системных вызовов, сделанных командой
•	ltrace -f -e getenv ls >/dev/null	Список библиотечных вызовов, сделанных командой
•	lsof -p $$	Список путей, которые открывал процесс
•	lsof ~	Список процессов, которые имеют открытые пути
•	tcpdump not port 22	Отобразить сетевой (кроме ssh) траффик. См. также tcpdump_not_me
•	ps -e -o pid,args --forest	Иерархический список процессов
•	ps -e -o pcpu,cpu,nice,state,cputime,args --sort pcpu \| sed '/^ 0.0 /d'	Список процессов с % использования процессора
•	ps -e -orss=,args= \| sort -b -k1,1n \| pr -TW$COLUMNS	Список процессов с используемой ими памятью (См. также ps_mem.py)
•	ps -C firefox-bin -L -o pid,tid,pcpu,state	Список всех потоков для конкретного процесса
•	ps -p 1,2	Список информации о процессах с конкретными IDs (идентификаторами)
•	last reboot	Показать историю ребутов системы
•	free -m	Показать количество оставшейся оперативной памяти (-m отображает в мегабайтах)
•	watch -n.1 'cat /proc/interrupts'	Наблюдать последовательно за изменяющимися данными
Информация о системе (см. также sysinfo) (’#’ означает, что для запуска нужны права root-а)
•	uname -a	Показать версию ядра и системную архитектуру
•	head -n1 /etc/issue	Показать название и версию дистрибутива (операционной системы)
•	cat /proc/partitions	Показать все разделы, зарегистрированные в системе
•	grep MemTotal /proc/meminfo	Показать всю оперативную память, которую видит система
•	grep "model name" /proc/cpuinfo	Показать информацию о процессоре(ах) (CPU)
•	lspci -tv	Показать информацию о шине PCI
•	lsusb -tv	Показать информацию о USB
•	mount \| column -t	Список смонтированных файловых систем в системе (херархический вывод)
#	dmidecode -q \| less	Отобразить информацию о SMBIOS/DMI
#	smartctl -A /dev/sda \| grep Power_On_Hours	Какой промежуток времени этот диск (система) был включен (работал)
#	hdparm -i /dev/sda	Показать информацию о диске sda
#	hdparm -tT /dev/sda	Протестировать скорость чтения на диске sda
#	badblocks -s /dev/sda	Протестировать на нечитаемые блоки диск sda
Интерактивность (см. также горячие клавиши linux)
•	readline	Редактор строки, используемый bash, python, gnuplot, …
•	screen	Виртуальные терминалы с возможностями открепления, …
•	mc	Мощный файл менеджер, которые может просматривать rpm, tar, ftp, ssh, …
•	gnuplot	Интерактивная (скриптовая) графика
•	links	Текстовый веб браузер
Разное
•	alias hd='od -Ax -tx1z -v'	Ручной 16-ричный дамп (пример использования: hd /proc/self/cmdline \| less)
•	alias realpath='readlink -f'	Канонический путь (пример использования: realpath ~/../$USER)
•	set \| grep $USER	Поиск в текущем environment (окружении)
	touch -c -t 0304050607 file	Установить дату для файла (YYMMDDhhmm)
•	python -m SimpleHTTPServer	Отобразить дерево текущего каталога по адресу http://$HOSTNAME:8000/

Commands_1

2009-04-24T00:55:00.000-07:00

System

Running kernel and system information

# uname -a                           # Get the kernel version (and BSD version)
# cat /etc/SuSE-release              # Get SuSE version
# cat /etc/debian_version            # Get Debian version

Use /etc/DISTR-release with DISTR= lsb (Ubuntu), redhat, gentoo, mandrake, sun (Solaris), and so on.

# uptime                             # Show how long the system has been running + load
# hostname                           # system's host name
# hostname -i                        # Display the IP address of the host.
# man hier                           # Description of the file system hierarchy
# last reboot                        # Show system reboot history

Hardware Informations

Kernel detected hardware

# dmesg                              # Detected hardware and boot messages
# lsdev                              # information about installed hardware
# dd if=/dev/mem bs=1k skip=768 count=256 2>/dev/null | strings -n 8 # Read BIOS

Linux

# cat /proc/cpuinfo                  # CPU model
# cat /proc/meminfo                  # Hardware memory
# grep MemTotal /proc/meminfo        # Display the physical memory
# watch -n1 'cat /proc/interrupts'   # Watch changeable interrupts continuously
# free -m                            # Used and free memory (-m for MB)
# cat /proc/devices                  # Configured devices
# lspci -tv                          # Show PCI devices
# lsusb -tv                          # Show USB devices
# lshal                              # Show a list of all devices with their properties
# dmidecode                          # Show DMI/SMBIOS: hw info from the BIOS

FreeBSD

# sysctl hw.model                    # CPU model
# sysctl hw                          # Gives a lot of hardware information
# sysctl vm                          # Memory usage
# dmesg | grep "real mem"            # Hardware memory
# sysctl -a | grep mem               # Kernel memory settings and info
# sysctl dev                         # Configured devices
# pciconf -l -cv                     # Show PCI devices
# usbdevs -v                         # Show USB devices
# atacontrol list                    # Show ATA devices

Load, statistics and messages

The following commands are useful to find out what is going on on the system.

# top                                # display and update the top cpu processes
# mpstat 1                           # display processors related statistics
# vmstat 2                           # display virtual memory statistics
# iostat 2                           # display I/O statistics (2 s intervals)
# systat -vmstat 1                   # BSD summary of system statistics (1 s intervals)
# systat -tcp 1                      # BSD tcp connections (try also -ip)
# systat -netstat 1                  # BSD active network connections
# systat -ifstat 1                   # BSD network traffic through active interfaces
# systat -iostat 1                   # BSD CPU and and disk throughput
# tail -n 500 /var/log/messages      # Last 500 kernel/syslog messages
# tail /var/log/warn                 # System warnings messages see syslog.conf

Users

# id                                 # Show the active user id with login and group
# last                               # Show last logins on the system
# who                                # Show who is logged on the system
# groupadd admin                     # Add group "admin" and user colin (Linux/Solaris)
# useradd -c "Colin Barschel" -g admin -m colin
# userdel colin                      # Delete user colin (Linux/Solaris)
# adduser joe                        # FreeBSD add user joe (interactive)
# rmuser joe                         # FreeBSD delete user joe (interactive)
# pw groupadd admin                  # Use pw on FreeBSD
# pw groupmod admin -m newmember     # Add a new member to a group
# pw useradd colin -c "Colin Barschel" -g admin -m -s /bin/tcsh
# pw userdel colin; pw groupdel admin

Encrypted passwords are stored in /etc/shadow for Linux and Solaris and /etc/master.passwd on FreeBSD. If the master.passwd is modified manually (say to delete a password), run # pwd_mkdb -p master.passwd to rebuild the database.

To temporarily prevent logins system wide (for all users but root) use nologin. The message in nologin will be displayed.

# echo "Sorry no login now" > /etc/nologin       # (Linux)
# echo "Sorry no login now" > /var/run/nologin   # (FreeBSD)

Limits

Some application require higher limits on open files and sockets (like a proxy web server, database). The default limits are usually too low.

Linux

Per shell/script

The shell limits are governed by ulimit. The status is checked with ulimit -a. For example to change the open files limit from 1024 to 10240 do:

# ulimit -n 10240                    # This is only valid within the shell

The ulimit command can be used in a script to change the limits for the script only.

Per user/process

# cat /etc/security/limits.conf
*   hard    nproc   250              # Limit user processes
asterisk hard nofile 409600          # Limit application open files

System wide

Kernel limits are set with sysctl. Permanent limits are set in /etc/sysctl.conf.

# sysctl -a                          # View all system limits
# sysctl fs.file-max                 # View max open files limit
# sysctl fs.file-max=102400          # Change max open files limit
# cat /etc/sysctl.conf
fs.file-max=102400                   # Permanent entry in sysctl.conf
# cat /proc/sys/fs/file-nr           # How many file descriptors are in use

FreeBSD

Per shell/script

Use the command limits in csh or tcsh or as in Linux, use ulimit in an sh or bash shell.

Per user/process

The default limits on login are set in /etc/login.conf. An unlimited value is still limited by the system maximal value.

System wide

Kernel limits are also set with sysctl. Permanent limits are set in /etc/sysctl.conf or /boot/loader.conf. The syntax is the same as Linux but the keys are different.

# sysctl -a                          # View all system limits
# sysctl kern.maxfiles=XXXX          # maximum number of file descriptors
kern.ipc.nmbclusters=32768           # Permanent entry in /etc/sysctl.conf
kern.maxfiles=65536                  # Typical values for Squid
kern.maxfilesperproc=32768
kern.ipc.somaxconn=8192              # TCP queue. Better for apache/sendmail
# sysctl kern.openfiles              # How many file descriptors are in use
# sysctl kern.ipc.numopensockets     # How many open sockets are in use

See The FreeBSD handbook Chapter 11http://www.freebsd.org/handbook/configtuning-kernel-limits.html for details.

Solaris

The following values in /etc/system will increase the maximum file descriptors per proc:

set rlim_fd_max = 4096               # Hard limit on file descriptors for a single proc
set rlim_fd_cur = 1024               # Soft limit on file descriptors for a single proc

Runlevels

Linux

Once booted, the kernel starts init which then starts rc which starts all scripts belonging to a runlevel. The scripts are stored in /etc/init.d and are linked into /etc/rc.d/rcN.d with N the runlevel number.
The default runlevel is configured in /etc/inittab. It is usually 3 or 5:

# grep default: /etc/inittab                                  
id:3:initdefault:

The actual runlevel (the list is shown below) can be changed with init. For example to go from 3 to 5:

# init 5                             # Enters runlevel 5

0 Shutdown and halt
1 Single-User mode (also S)
2 Multi-user without network
3 Multi-user with network
5 Multi-user with X
6 Reboot

Use chkconfig to configure the programs that will be started at boot in a runlevel.

# chkconfig --list                   # List all init scripts
# chkconfig --list sshd              # Report the status of sshd
# chkconfig sshd --level 35 on       # Configure sshd for levels 3 and 5
# chkconfig sshd off                 # Disable sshd for all runlevels

Debian and Debian based distributions like Ubuntu or Knoppix use the command update-rc.d to manage the runlevels scripts. Default is to start in 2,3,4 and 5 and shutdown in 0,1 and 6.

# update-rc.d sshd defaults          # Activate sshd with the default runlevels
# update-rc.d sshd start 20 2 3 4 5 . stop 20 0 1 6 .  # With explicit arguments
# update-rc.d -f sshd remove         # Disable sshd for all runlevels
# shutdown -h now (or # poweroff)    # Shutdown and halt the system

FreeBSD

The BSD boot approach is different from the SysV, there are no runlevels. The final boot state (single user, with or without X) is configured in /etc/ttys. All OS scripts are located in /etc/rc.d/ and in /usr/local/etc/rc.d/ for third-party applications. The activation of the service is configured in /etc/rc.conf and /etc/rc.conf.local. The default behavior is configured in /etc/defaults/rc.conf. The scripts responds at least to start|stop|status.

# /etc/rc.d/sshd status
sshd is running as pid 552.
# shutdown now                       # Go into single-user mode
# exit                               # Go back to multi-user mode
# shutdown -p now                    # Shutdown and halt the system
# shutdown -r now                    # Reboot

The process init can also be used to reach one of the following states level. For example # init 6 for reboot.

0 Halt and turn the power off (signal USR2)
1 Go to single-user mode (signal TERM)
6 Reboot the machine (signal INT)
c Block further logins (signal TSTP)
q Rescan the ttys(5) file (signal HUP)

Reset root password

Linux method 1

At the boot loader (lilo or grub), enter the following boot option:

init=/bin/sh

The kernel will mount the root partition and init will start the bourne shell instead of rc and then a runlevel. Use the command passwd at the prompt to change the password and then reboot. Forget the single user mode as you need the password for that.
If, after booting, the root partition is mounted read only, remount it rw:

# mount -o remount,rw /
# passwd                             # or delete the root password (/etc/shadow)
# sync; mount -o remount,ro /        # sync before to remount read only
# reboot

FreeBSD and Linux method 2

FreeBSD won't let you go away with the simple init trick. The solution is to mount the root partition from an other OS (like a rescue CD) and change the password on the disk.

Boot a live CD or installation CD into a rescue mode which will give you a shell.
Find the root partition with fdisk e.g. fdisk /dev/sda
Mount it and use chroot:

# mount -o rw /dev/ad4s3a /mnt
# chroot /mnt                        # chroot into /mnt
# passwd
# reboot

Alternatively on FreeBSD, boot in single user mode, remount / rw and use passwd.

# mount -u /; mount -a               # will mount / rw
# passwd
# reboot

Kernel modules

Linux

# lsmod                              # List all modules loaded in the kernel
# modprobe isdn                      # To load a module (here isdn)

FreeBSD

# kldstat                            # List all modules loaded in the kernel
# kldload crypto                     # To load a module (here crypto)

Compile Kernel

Linux

# cd /usr/src/linux
# make mrproper                      # Clean everything, including config files
# make oldconfig                     # Create a new config file from the current kernel
# make menuconfig                    # or xconfig (Qt) or gconfig (GTK)
# make                               # Create a compressed kernel image
# make modules                       # Compile the modules
# make modules_install               # Install the modules
# make install                       # Install the kernel
# reboot

FreeBSD

To modify and rebuild the kernel, copy the generic configuration file to a new name and edit it as needed. It is however also possible to edit the file GENERIC directly.

# cd /usr/src/sys/i386/conf/
# cp GENERIC MYKERNEL
# cd /usr/src
# make buildkernel KERNCONF=MYKERNEL
# make installkernel KERNCONF=MYKERNEL

To rebuild the full OS:

# make buildworld                    # Build the full OS but not the kernel
# make buildkernel                   # Use KERNCONF as above if appropriate
# make installkernel
# reboot
# mergemaster -p                     # Compares only files known to be essential
# make installworld
# mergemaster                        # Update all configuration and other files
# reboot

For small changes in the source, sometimes the short version is enough:

# make kernel world                  # Compile and install both kernel and OS
# mergemaster
# reboot

Processes

Listing | Priority | Background/Foreground | Top | Kill

Listing and PIDs

Each process has a unique number, the PID. A list of all running process is retrieved with ps.

# ps -auxefw                         # Extensive list of all running process

However more typical usage is with a pipe or with pgrep:

# ps axww | grep cron
586  ??  Is     0:01.48 /usr/sbin/cron -s
# pgrep -l sshd                      # Find the PIDs of processes by (part of) name
# fuser -va 22/tcp                   # List processes using port 22
# fuser -va /home                    # List processes accessing the /home partiton
# strace df                          # Trace system calls and signals
# truss df                           # same as above on FreeBSD/Solaris/Unixware
# history | tail -50                 # Display the last 50 used commands

Priority

Change the priority of a running process with renice. Negative numbers have a higher priority, the lowest is -20 and "nice" have a positive value.

# renice -5 586                      # Stronger priority
586: old priority 0, new priority -5

Start the process with a defined priority with nice. Positive is "nice" or weak, negative is strong scheduling priority. Make sure you know if /usr/bin/nice or the shell built-in is used (check with # which nice).

# nice -n -5 top                     # Stronger priority (/usr/bin/nice)
# nice -n 5 top                      # Weaker priority (/usr/bin/nice)
# nice +5 top                        # tcsh builtin nice (same as above!)

Background/Foreground

When started from a shell, processes can be brought in the background and back to the foreground with [Ctrl]-[Z] (^Z), bg and fg. For example start two processes, bring them in the background, list the processes with jobs and bring one in the foreground.

# ping cb.vu > ping.log
^Z                                   # ping is suspended (stopped) with [Ctrl]-[Z]
# bg                                 # put in background and continues running
# jobs -l                            # List processes in background
[1]  - 36232 Running                       ping cb.vu > ping.log
[2]  + 36233 Suspended (tty output)        top
# fg %2                              # Bring process 2 back in foreground

Use nohup to start a process which has to keep running when the shell is closed (immune to hangups).

# nohup ping -i 60 > ping.log &

Top

The program top displays running information of processes.

# top

While top is running press the key h for a help overview. Useful keys are:

u [user name] To display only the processes belonging to the user. Use + or blank to see all users
k [pid] Kill the process with pid.
1 To display all processors statistics (Linux only)
R Toggle normal/reverse sort.

Signals/Kill

Terminate or send a signal with kill or killall.

# ping -i 60 cb.vu > ping.log &
[1] 4712
# kill -s TERM 4712                  # same as kill -15 4712
# killall -1 httpd                   # Kill HUP processes by exact name
# pkill -9 http                      # Kill TERM processes by (part of) name
# pkill -TERM -u www                 # Kill TERM processes owned by www
# fuser -k -TERM -m /home            # Kill every process accessing /home (to umount)

Important signals are:

1 HUP (hang up)
2 INT (interrupt)
3 QUIT (quit)
9 KILL (non-catchable, non-ignorable kill)
15 TERM (software termination signal)

File System

Permissions

Change permission and ownership with chmod and chown. The default umask can be changed for all users in /etc/profile for Linux or /etc/login.conf for FreeBSD. The default umask is usually 022. The umsak is subtracted from 777, thus umask 022 results in a permission 0f 755.

1 --x execute                        # Mode 764 = exec/read/write | read/write | read
2 -w- write                          # For:       |--  Owner  --|   |- Group-|   |Oth|
4 r-- read
ugo=a                              u=user, g=group, o=others, a=everyone

# chmod [OPTION] MODE[,MODE] FILE    # MODE is of the form [ugoa]*([-+=]([rwxXst]))
# chmod 640 /var/log/maillog         # Restrict the log -rw-r-----
# chmod u=rw,g=r,o= /var/log/maillog # Same as above
# chmod -R o-r /home/*               # Recursive remove other readable for all users
# chmod u+s /path/to/prog            # Set SUID bit on executable (know what you do!)
# find / -perm -u+s -print           # Find all programs with the SUID bit
# chown user:group /path/to/file     # Change the user and group ownership of a file
# chgrp group /path/to/file          # Change the group ownership of a file

Disk information

# diskinfo -v /dev/ad2               # information about disk (sector/size) FreeBSD
# hdparm -I /dev/sda                 # information about the IDE/ATA disk (Linux)
# fdisk /dev/ad2                     # Display and manipulate the partition table
# smartctl -a /dev/ad2               # Display the disk SMART info

Boot

FreeBSD

To boot an old kernel if the new kernel doesn't boot, stop the boot at during the count down.

# unload
# load kernel.old
# boot

System mount points/Disk usage

# mount | column -t                  # Show mounted file-systems on the system
# df                                 # display free disk space and mounted devices
# cat /proc/partitions               # Show all registered partitions (Linux)

Disk usage

# du -sh *                           # Directory sizes as listing
# du -csh                            # Total directory size of the current directory
# du -ks * | sort -n -r              # Sort everything by size in kilobytes
# ls -lSr                            # Show files, biggest last

Who has which files opened

This is useful to find out which file is blocking a partition which has to be unmounted and gives a typical error of:

# umount /home/
umount: unmount of /home             # umount impossible because a file is locking home
failed: Device busy

FreeBSD and most Unixes

# fstat -f /home                     # for a mount point
# fstat -p PID                       # for an application with PID
# fstat -u user                      # for a user name

Find opened log file (or other opened files), say for Xorg:

# ps ax | grep Xorg | awk '{print $1}'
1252
# fstat -p 1252
USER     CMD          PID   FD MOUNT      INUM MODE         SZ|DV R/W
root     Xorg        1252 root /             2 drwxr-xr-x     512  r
root     Xorg        1252 text /usr     216016 -rws--x--x  1679848 r
root     Xorg        1252    0 /var     212042 -rw-r--r--   56987  w

The file with inum 212042 is the only file in /var:

# find -x /var -inum 212042
/var/log/Xorg.0.log

Linux

Find opened files on a mount point with fuser or lsof:

# fuser -m /home                     # List processes accessing /home
# lsof /home
COMMAND   PID    USER   FD   TYPE DEVICE    SIZE     NODE NAME
tcsh    29029 eedcoba  cwd    DIR   0,18   12288  1048587 /home/eedcoba (guam:/home)
lsof    29140 eedcoba  cwd    DIR   0,18   12288  1048587 /home/eedcoba (guam:/home)

About an application:

ps ax | grep Xorg | awk '{print $1}'
3324
# lsof -p 3324
COMMAND   PID    USER   FD   TYPE DEVICE    SIZE    NODE NAME
Xorg    3324 root    0w   REG        8,6   56296      12492 /var/log/Xorg.0.log

About a single file:

# lsof /var/log/Xorg.0.log
COMMAND  PID USER   FD   TYPE DEVICE  SIZE  NODE NAME
Xorg    3324 root    0w   REG    8,6 56296 12492 /var/log/Xorg.0.log

Mount/remount a file system

For example the cdrom. If listed in /etc/fstab:

# mount /cdrom

Or find the device in /dev/ or with dmesg

FreeBSD

# mount -v -t cd9660 /dev/cd0c /mnt  # cdrom
# mount_cd9660 /dev/wcd0c /cdrom     # other method
# mount -v -t msdos /dev/fd0c /mnt   # floppy

Entry in /etc/fstab:

# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/acd0               /cdrom          cd9660  ro,noauto       0       0

To let users do it:

# sysctl vfs.usermount=1  # Or insert the line "vfs.usermount=1" in /etc/sysctl.conf

Linux

# mount -t auto /dev/cdrom /mnt/cdrom   # typical cdrom mount command
# mount /dev/hdc -t iso9660 -r /cdrom   # typical IDE
# mount /dev/sdc0 -t iso9660 -r /cdrom  # typical SCSI

Entry in /etc/fstab:

/dev/cdrom   /media/cdrom  subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec 0 0

Mount a FreeBSD partition with Linux

Find the partition number containing with fdisk, this is usually the root partition, but it could be an other BSD slice too. If the FreeBSD has many slices, they are the one not listed in the fdisk table, but visible in /dev/sda* or /dev/hda*.

# fdisk /dev/sda                     # Find the FreeBSD partition
/dev/sda3   *        5357        7905    20474842+  a5  FreeBSD
# mount -t ufs -o ufstype=ufs2,ro /dev/sda3 /mnt
/dev/sda10 = /tmp; /dev/sda11 /usr   # The other slices

Remount

Remount a device without unmounting it. Necessary for fsck for example

# mount -o remount,ro /              # Linux
# mount -o ro /                      # FreeBSD

Copy the raw data from a cdrom into an iso image:

# dd if=/dev/cd0c of=file.iso

Mount an SMB share

Suppose we want to access the SMB share myshare on the computer smbserver, the address as typed on a Windows PC is \\smbserver\myshare\. We mount on /mnt/smbshare. Warning> cifs wants an IP or DNS name, not a Windows name.

Linux

# smbclient -U user -I 192.168.16.229 -L //smbshare/    # List the shares
# mount -t smbfs -o username=winuser //smbserver/myshare /mnt/smbshare
# mount -t cifs -o username=winuser,password=winpwd //192.168.16.229/myshare /mnt/share

Additionally with the package mount.cifs it is possible to store the credentials in a file, for example /home/user/.smb:

username=winuser
password=winpwd

And mount as follow:

# mount -t cifs -o credentials=/home/user/.smb //192.168.16.229/myshare /mnt/smbshare

FreeBSD

Use -I to give the IP (or DNS name); smbserver is the Windows name.

# smbutil view -I 192.168.16.229 //winuser@smbserver    # List the shares
# mount_smbfs -I 192.168.16.229 //winuser@smbserver/myshare /mnt/smbshare

Mount an image

Linux loop-back

# mount -t iso9660 -o loop file.iso /mnt                # Mount a CD image
# mount -t ext3 -o loop file.img /mnt                   # Mount an image with ext3 fs

FreeBSD

With memory device (do # kldload md.ko if necessary):

# mdconfig -a -t vnode -f file.iso -u 0
# mount -t cd9660 /dev/md0 /mnt
# umount /mnt; mdconfig -d -u 0                         # Cleanup the md device

Or with virtual node:

# vnconfig /dev/vn0c file.iso; mount -t cd9660 /dev/vn0c /mnt
# umount /mnt; vnconfig -u /dev/vn0c                    # Cleanup the vn device

Solaris and FreeBSD

with loop-back file interface or lofi:

# lofiadm -a file.iso
# mount -F hsfs -o ro /dev/lofi/1 /mnt
# umount /mnt; lofiadm -d /dev/lofi/1                   # Cleanup the lofi device

Create and burn an ISO image

This will copy the cd or DVD sector for sector. Without conv=notrunc, the image will be smaller if there is less content on the cd. See below and the dd examples.

# dd if=/dev/hdc of=/tmp/mycd.iso bs=2048 conv=notrunc

Use mkisofs to create a CD/DVD image from files in a directory. To overcome the file names restrictions: -r enables the Rock Ridge extensions common to UNIX systems, -J enables Joliet extensions used by Microsoft systems. -L allows ISO9660 filenames to begin with a period.

# mkisofs -J -L -r -V TITLE -o imagefile.iso /path/to/dir

On FreeBSD, mkisofs is found in the ports in sysutils/cdrtools.

Burn a CD/DVD ISO image

FreeBSD

FreeBSD does not enable DMA on ATAPI drives by default. DMA is enabled with the sysctl command and the arguments below, or with /boot/loader.conf with the following entries:

hw.ata.ata_dma="1"
hw.ata.atapi_dma="1"

Use burncd with an ATAPI device (burncd is part of the base system) and cdrecord (in sysutils/cdrtools) with a SCSI drive.

# burncd -f /dev/acd0 data imagefile.iso fixate      # For ATAPI drive
# cdrecord -scanbus                  # To find the burner device (like 1,0,0)
# cdrecord dev=1,0,0 imagefile.iso

Linux

Also use cdrecord with Linux as described above. Additionally it is possible to use the native ATAPI interface which is found with:

# cdrecord dev=ATAPI -scanbus

And burn the CD/DVD as above.

Convert a Nero .nrg file to .iso

Nero simply adds a 300Kb header to a normal iso image. This can be trimmed with dd.

# dd bs=1k if=imagefile.nrg of=imagefile.iso skip=300

Convert a bin/cue image to .iso

The little bchunk programhttp://freshmeat.net/projects/bchunk/ can do this. It is in the FreeBSD ports in sysutils/bchunk.

# bchunk imagefile.bin imagefile.cue imagefile.iso

Create a file based image

For example a partition of 1GB using the file /usr/vdisk.img.

FreeBSD

# dd if=/dev/random of=/usr/vdisk.img bs=1K count=1M
# mdconfig -a -t vnode -f /usr/vdisk.img -u 1         # Creates device /dev/md1
# bsdlabel -w /dev/md1
# newfs /dev/md1c
# mount /dev/md1c /mnt
# umount /mnt; mdconfig -d -u 1; rm /usr/vdisk.img    # Cleanup the md device

Linux

# dd if=/dev/zero of=/usr/vdisk.img bs=1024k count=1024
# mkfs.ext3 /usr/vdisk.img
# mount -o loop /usr/vdisk.img /mnt
# umount /mnt; rm /usr/vdisk.img                      # Cleanup

Linux with losetup

/dev/zero is much faster than urandom, but less secure for encryption.

# dd if=/dev/urandom of=/usr/vdisk.img bs=1024k count=1024
# losetup /dev/loop0 /usr/vdisk.img                   # Creates and associates /dev/loop0
# mkfs.ext3 /dev/loop0
# mount /dev/loop0 /mnt
# losetup -a                                          # Check used loops
# umount /mnt
# losetup -d /dev/loop0                               # Detach
# rm /usr/vdisk.img

Create a memory file system

A memory based file system is very fast for heavy IO application. How to create a 64 MB partition mounted on /memdisk:

FreeBSD

# mount_mfs -o rw -s 64M md /memdisk
# umount /memdisk; mdconfig -d -u 0                   # Cleanup the md device
md     /memdisk     mfs     rw,-s64M    0   0         # /etc/fstab entry

Linux

# mount -t tmpfs -osize=64m tmpfs /memdisk

Disk performance

Read and write a 1 GB file on partition ad4s3c (/home)

# time dd if=/dev/ad4s3c of=/dev/null bs=1024k count=1000
# time dd if=/dev/zero bs=1024k count=1000 of=/home/1Gb.file
# hdparm -tT /dev/hda      # Linux only

Network

Debugging (See also Traffic analysis)

# mii-diag eth0             # Show the link status (Linux)
# ifconfig fxp0             # Check the "media" field on FreeBSD
# arp -a                    # Check the router (or host) ARP entry (all OS)
# ping cb.vu                # The first thing to try...
# traceroute cb.vu          # Print the route path to destination
# mii-diag -F 100baseTx-FD eth0  # Force 100Mbit Full duplex (Linux)
# ifconfig fxp0 media 100baseTX mediaopt full-duplex  # Same for FreeBSD
# netstat -s                # System-wide statistics for each network protocol

Routing

Print routing table

# route -n                 # Linux
# netstat -rn              # Linux, BSD and UNIX
# route print              # Windows

Add and delete a route

FreeBSD

# route add 212.117.0.0/16 192.168.1.1
# route delete 212.117.0.0/16
# route add default 192.168.1.1

Add the route permanently in /etc/rc.conf

static_routes="myroute"
route_myroute="-net 212.117.0.0/16 192.168.1.1"

Linux

# route add -net 192.168.20.0 netmask 255.255.255.0 gw 192.168.16.254
# ip route add 192.168.20.0/24 via 192.168.16.254       # same as above with ip route
# route add -net 192.168.20.0 netmask 255.255.255.0 dev eth0
# route add default gw 192.168.51.254
# ip route add default via 192.168.51.254               # same as above with ip route
# route delete -net 192.168.20.0 netmask 255.255.255.0

Windows

# Route add 192.168.50.0 mask 255.255.255.0 192.168.51.253
# Route add 0.0.0.0 mask 0.0.0.0 192.168.51.254

Use add -p to make the route persistent.

Configure additional IP addresses

Linux

# ifconfig eth0 192.168.50.254 netmask 255.255.255.0       # First IP
# ifconfig eth0:0 192.168.51.254 netmask 255.255.255.0     # Second IP

FreeBSD

# ifconfig fxp0 inet 192.168.50.254/24                     # First IP
# ifconfig fxp0 alias 192.168.51.254 netmask 255.255.255.0 # Second IP

Permanent entries in /etc/rc.conf

ifconfig_fxp0="inet 192.168.50.254  netmask 255.255.255.0"
ifconfig_fxp0_alias0="192.168.51.254 netmask 255.255.255.0"

Change MAC address

# ifconfig eth0 hw ether 00:01:02:03:04:05      # Linux
# ifconfig fxp0 link 00:01:02:03:04:05          # FreeBSD

Ports in use

Listening open ports:

# netstat -an | grep LISTEN
# lsof -i                  # Linux list all Internet connections
# socklist                 # Linux display list of open sockets
# sockstat -4              # FreeBSD application listing
# netstat -anp --udp --tcp | grep LISTEN        # Linux
# netstat -tup             # List active connections to/from system (Linux)
# netstat -tupl            # List listening ports from system (Linux)
# netstat -ano             # Windows

Firewall

Check if a firewall is running (typical configuration only):

Linux

# iptables -L -n -v                  # For status
Open the iptables firewall
# iptables -Z                        # Zero the packet and byte counters in all chains
# iptables -F                        # Flush all chains
# iptables -X                        # Delete all chains
# iptables -P INPUT       ACCEPT     # Open everything
# iptables -P FORWARD     ACCEPT
# iptables -P OUTPUT      ACCEPT

FreeBSD

# ipfw show                          # For status
# ipfw list 65535 # if answer is "65535 deny ip from any to any" the fw is disabled
# sysctl net.inet.ip.fw.enable=0     # Disable
# sysctl net.inet.ip.fw.enable=1     # Enable

IP Forward for routing

Linux

Check and then enable IP forward with:

# cat /proc/sys/net/ipv4/ip_forward  # Check IP forward 0=off, 1=on
# echo 1 > /proc/sys/net/ipv4/ip_forward

or edit /etc/sysctl.conf with:

net.ipv4.ip_forward = 1

FreeBSD

Check and enable with:

# sysctl net.inet.ip.forwarding      # Check IP forward 0=off, 1=on
# sysctl net.inet.ip.forwarding=1
# sysctl net.inet.ip.fastforwarding=1 # For dedicated router or firewall
Permanent with entry in /etc/rc.conf:
gateway_enable="YES"                 # Set to YES if this host will be a gateway.

NAT Network Address Translation

Linux

# iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # to activate NAT
# iptables -t nat -A PREROUTING -p tcp -d 78.31.70.238 --dport 20022 -j DNAT \
--to 192.168.16.44:22           # Port forward 20022 to internal IP port ssh
# iptables -t nat -A PREROUTING -p tcp -d 78.31.70.238 --dport 993:995 -j DNAT \
--to 192.168.16.254:993:995     # Port forward of range 993-995
# ip route flush cache
# iptables -L -t nat            # Check NAT status

Delete the port forward with -D instead of -A.

FreeBSD

# natd -s -m -u -dynamic -f /etc/natd.conf -n fxp0
Or edit /etc/rc.conf with:
firewall_enable="YES"           # Set to YES to enable firewall functionality
firewall_type="open"            # Firewall type (see /etc/rc.firewall)
natd_enable="YES"               # Enable natd (if firewall_enable == YES).
natd_interface="tun0"           # Public interface or IP address to use.
natd_flags="-s -m -u -dynamic -f /etc/natd.conf"

Port forward with:

# cat /etc/natd.conf
same_ports yes
use_sockets yes
unregistered_only
# redirect_port tcp insideIP:2300-2399 3300-3399  # port range
redirect_port udp 192.168.51.103:7777 7777

DNS

On Unix the DNS entries are valid for all interfaces and are stored in /etc/resolv.conf. The domain to which the host belongs is also stored in this file. A minimal configuration is:

nameserver 78.31.70.238
search sleepyowl.net intern.lab
domain sleepyowl.net

Check the system domain name with:

# hostname -d                        # Same as dnsdomainname

Windows

On Windows the DNS are configured per interface. To display the configured DNS and to flush the DNS cache use:

# ipconfig /?                        # Display help
# ipconfig /all                      # See all information including DNS
# ipconfig /flushdns                 # Flush the DNS cache

Forward queries

Dig is you friend to test the DNS settings. For example the public DNS server 213.133.105.2 ns.second-ns.de can be used for testing. See from which server the client receives the answer (simplified answer).

# dig sleepyowl.net
sleepyowl.net.          600     IN      A       78.31.70.238
;; SERVER: 192.168.51.254#53(192.168.51.254)

The router 192.168.51.254 answered and the response is the A entry. Any entry can be queried and the DNS server can be selected with @:

# dig MX google.com
# dig @127.0.0.1 NS sun.com          # To test the local server
# dig @204.97.212.10 NS MX heise.de  # Query an external server
# dig AXFR @ns1.xname.org cb.vu      # Get the full zone (zone transfer)

The program host is also powerful.

# host -t MX cb.vu                   # Get the mail MX entry
# host -t NS -T sun.com              # Get the NS record over a TCP connection
# host -a sleepyowl.net              # Get everything

Reverse queries

Find the name belonging to an IP address (in-addr.arpa.). This can be done with dig, host and nslookup:

# dig -x 78.31.70.238
# host 78.31.70.238
# nslookup 78.31.70.238

/etc/hosts

Single hosts can be configured in the file /etc/hosts instead of running named locally to resolve the hostname queries. The format is simple, for example:

78.31.70.238   sleepyowl.net   sleepyowl

The priority between hosts and a dns query, that is the name resolution order, can be configured in /etc/nsswitch.conf AND /etc/host.conf. The file also exists on Windows, it is usually in:

C:\WINDOWS\SYSTEM32\DRIVERS\ETC

DHCP

Linux

Some distributions (SuSE) use dhcpcd as client. The default interface is eth0.

# dhcpcd -n eth0           # Trigger a renew
# dhcpcd -k eth0           # release and shutdown

The lease with the full information is stored in:

/var/lib/dhcpcd/dhcpcd-eth0.info

FreeBSD

FreeBSD (and Debian) uses dhclient. To configure an interface (for example bge0) run:

# dhclient bge0

The lease with the full information is stored in:

/var/db/dhclient.leases.bge0

Use

/etc/dhclient.conf

to prepend options or force different options:

# cat /etc/dhclient.conf
interface "rl0" {
prepend domain-name-servers 127.0.0.1;
default domain-name "sleepyowl.net";
supersede domain-name "sleepyowl.net";
}

Windows

The dhcp lease can be renewed with ipconfig:

# ipconfig /renew          # renew all adapters
# ipconfig /renew LAN      # renew the adapter named "LAN"
# ipconfig /release WLAN   # release the adapter named "WLAN"

Yes it is a good idea to rename you adapter with simple names!

Traffic analysis

Bmonhttp://people.suug.ch/~tgr/bmon/ is a small console bandwidth monitor and can display the flow on different interfaces.

Sniff with tcpdump

# tcpdump -nl -i bge0 not port ssh and src \(192.168.16.121 or 192.168.16.54\)
# tcpdump -l > dump && tail -f dump               # Buffered output
# tcpdump -i rl0 -w traffic.rl0                   # Write traffic in binary file
# tcpdump -r traffic.rl0                          # Read from file (also for ethereal
# tcpdump port 80                                 # The two classic commands
# tcpdump host google.com
# tcpdump -i eth0 -X port \(110 or 143\)          # Check if pop or imap is secure
# tcpdump -n -i eth0 icmp                         # Only catch pings
# tcpdump -i eth0 -s 0 -A port 80 | grep GET      # -s 0 for full packet -A for ASCII

Additional important options:

-A Print each packets in clear text (without header)
-X Print packets in hex and ASCII
-l Make stdout line buffered
-D Print all interfaces available

On Windows use windump from www.winpcap.org. Use windump -D to list the interfaces.

Scan with nmap

Nmaphttp://insecure.org/nmap/ is a port scanner with OS detection, it is usually installed on most distributions and is also available for Windows. If you don't scan your servers, hackers do it for you...

# nmap cb.vu               # scans all reserved TCP ports on the host
# nmap -sP 192.168.16.0/24 # Find out which IP are used and by which host on 0/24
# nmap -sS -sV -O cb.vu    # Do a stealth SYN scan with version and OS detection
PORT      STATE  SERVICE             VERSION
22/tcp    open   ssh                 OpenSSH 3.8.1p1 FreeBSD-20060930 (protocol 2.0)
25/tcp    open   smtp                Sendmail smtpd 8.13.6/8.13.6
80/tcp    open   http                Apache httpd 2.0.59 ((FreeBSD) DAV/2 PHP/4.
[...]
Running: FreeBSD 5.X
Uptime 33.120 days (since Fri Aug 31 11:41:04 2007)

Traffic control (QoS)

Traffic control manages the queuing, policing, scheduling, and other traffic parameters for a network. The following examples are simple practical uses of the Linux and FreeBSD capabilities to better use the available bandwidth.

Limit upload

DSL or cable modems have a long queue to improve the upload throughput. However filling the queue with a fast device (e.g. ethernet) will dramatically decrease the interactivity. It is therefore useful to limit the device upload rate to match the physical capacity of the modem, this should greatly improve the interactivity. Set to about 90% of the modem maximal (cable) speed.

Linux

For a 512 Kbit upload modem.

# tc qdisc add dev eth0 root tbf rate 480kbit latency 50ms burst 1540
# tc -s qdisc ls dev eth0                         # Status
# tc qdisc del dev eth0 root                      # Delete the queue
# tc qdisc change dev eth0 root tbf rate 220kbit latency 50ms burst 1540

FreeBSD

FreeBSD uses the dummynet traffic shaper which is configured with ipfw. Pipes are used to set limits the bandwidth in units of [K|M]{bit/s|Byte/s}, 0 means unlimited bandwidth. Using the same pipe number will reconfigure it. For example limit the upload bandwidth to 500 Kbit.

# kldload dummynet                                # load the module if necessary
# ipfw pipe 1 config bw 500Kbit/s                 # create a pipe with limited bandwidth
# ipfw add pipe 1 ip from me to any               # divert the full upload into the pipe

Quality of service

Linux

Priority queuing with tc to optimize VoIP. See the full example on voip-info.org or www.howtoforge.com. Suppose VoIP uses udp on ports 10000:11024 and device eth0 (could also be ppp0 or so). The following commands define the QoS to three queues and force the VoIP traffic to queue 1 with QoS 0x1e (all bits set). The default traffic flows into queue 3 and QoS Minimize-Delay flows into queue 2.

# tc qdisc add dev eth0 root handle 1: prio priomap 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 0
# tc qdisc add dev eth0 parent 1:1 handle 10: sfq
# tc qdisc add dev eth0 parent 1:2 handle 20: sfq
# tc qdisc add dev eth0 parent 1:3 handle 30: sfq
# tc filter add dev eth0 protocol ip parent 1: prio 1 u32 \
match ip dport 10000 0x3C00 flowid 1:1          # use server port range
match ip dst 123.23.0.1 flowid 1:1              # or/and use server IP

Status and remove with

# tc -s qdisc ls dev eth0                         # queue status
# tc qdisc del dev eth0 root                      # delete all QoS

Calculate port range and mask

The tc filter defines the port range with port and mask which you have to calculate. Find the 2^N ending of the port range, deduce the range and convert to HEX. This is your mask. Example for 10000 -> 11024, the range is 1024.

# 2^13 (8192) < class="cmt"># ending is 2^14 = 16384
# echo "obase=16;(2^14)-1024" | bc                # mask is 0x3C00

FreeBSD

The max link bandwidth is 500Kbit/s and we define 3 queues with priority 100:10:1 for VoIP:ssh:all the rest.

# ipfw pipe 1 config bw 500Kbit/s
# ipfw queue 1 config pipe 1 weight 100
# ipfw queue 2 config pipe 1 weight 10
# ipfw queue 3 config pipe 1 weight 1
# ipfw add 10 queue 1 proto udp dst-port 10000-11024
# ipfw add 11 queue 1 proto udp dst-ip 123.23.0.1 # or/and use server IP
# ipfw add 20 queue 2 dsp-port ssh
# ipfw add 30 queue 3 from me to any              # all the rest

Status and remove with

# ipfw list                                       # rules status
# ipfw pipe list                                  # pipe status
# ipfw flush                                      # deletes all rules but default

NIS Debugging

Some commands which should work on a well configured NIS client:

# ypwhich                  # get the connected NIS server name
# domainname               # The NIS domain name as configured
# ypcat group              # should display the group from the NIS server
# cd /var/yp && make       # Rebuild the yp database

Is ypbind running?

# ps auxww | grep ypbind
/usr/sbin/ypbind -s -m -S servername1,servername2 # FreeBSD
/usr/sbin/ypbind           # Linux
# yppoll passwd.byname
Map passwd.byname has order number 1190635041. Mon Sep 24 13:57:21 2007
The master server is servername.domain.net.

Linux

# cat /etc/yp.conf
ypserver servername
domain domain.net broadcast

SSH SCP

Public key | Fingerprint | SCP | Tunneling

Public key authentication

Connect to a host without password using public key authentication. The idea is to append your public key to the authorized_keys2 file on the remote host. For this example let's connect host-client to host-server, the key is generated on the client.

Use ssh-keygen to generate a key pair. ~/.ssh/id_dsa is the private key, ~/.ssh/id_dsa.pub is the public key.
Copy only the public key to the server and append it to the file ~/.ssh/authorized_keys2 on your home on the server.

# ssh-keygen -t dsa -N ''
# cat ~/.ssh/id_dsa.pub | ssh you@host-server "cat - >> ~/.ssh/authorized_keys2"

Using the Windows client from ssh.com

The non commercial version of the ssh.com client can be downloaded the main ftp site: ftp.ssh.com/pub/ssh/. Keys generated by the ssh.com client need to be converted for the OpenSSH server. This can be done with the ssh-keygen command.

Create a key pair with the ssh.com client: Settings - User Authentication - Generate New....
I use Key type DSA; key length 2048.
Copy the public key generated by the ssh.com client to the server into the ~/.ssh folder.
The keys are in C:\Documents and Settings\%USERNAME%\Application Data\SSH\UserKeys.

Use the ssh-keygen command on the server to convert the key:

# cd ~/.ssh
# ssh-keygen -i -f keyfilename.pub >> authorized_keys2

Notice: We used a DSA key, RSA is also possible. The key is not protected by a password.

Using putty for Windows

Puttyhttp://www.chiark.greenend.org.uk/~sgtatham/putty/download.html is a simple and free ssh client for Windows.

Create a key pair with the puTTYgen program.
Save the public and private keys (for example into C:\Documents and Settings\%USERNAME%\.ssh).
Copy the public key to the server into the ~/.ssh folder:
```
# scp .ssh/puttykey.pub root@192.168.51.254:.ssh/
```
Use the ssh-keygen command on the server to convert the key for OpenSSH:
```
# cd ~/.ssh
# ssh-keygen -i -f puttykey.pub >> authorized_keys2
```
Point the private key location in the putty settings: Connection - SSH - Auth

Check fingerprint

At the first login, ssh will ask if the unknown host with the fingerprint has to be stored in the known hosts. To avoid a man-in-the-middle attack the administrator of the server can send you the server fingerprint which is then compared on the first login. Use ssh-keygen -l to get the fingerprint (on the server):

# ssh-keygen -l -f /etc/ssh/ssh_host_rsa_key.pub      # For RSA key
2048 61:33:be:9b:ae:6c:36:31:fd:83:98:b7:99:2d:9f:cd /etc/ssh/ssh_host_rsa_key.pub
# ssh-keygen -l -f /etc/ssh/ssh_host_dsa_key.pub      # For DSA key (default)
2048 14:4a:aa:d9:73:25:46:6d:0a:48:35:c7:f4:16:d4:ee /etc/ssh/ssh_host_dsa_key.pub

Now the client connecting to this server can verify that he is connecting to the right server:

# ssh linda
The authenticity of host 'linda (192.168.16.54)' can't be established.
DSA key fingerprint is 14:4a:aa:d9:73:25:46:6d:0a:48:35:c7:f4:16:d4:ee.
Are you sure you want to continue connecting (yes/no)? yes

Secure file transfer

Some simple commands:

# scp file.txt host-two:/tmp
# scp joe@host-two:/www/*.html /www/tmp
# scp -r joe@host-two:/www /www/tmp

In Konqueror or Midnight Commander it is possible to access a remote file system with the address fish://user@gate. However the implementation is very slow.
Furthermore it is possible to mount a remote folder with sshfs a file system client based on SCP. See fuse sshfshttp://fuse.sourceforge.net/sshfs.html.

Tunneling

SSH tunneling allows to forward or reverse forward a port over the SSH connection, thus securing the traffic and accessing ports which would otherwise be blocked. This only works with TCP. The general nomenclature for forward and reverse is (see also ssh and NAT example):

# ssh -L localport:desthost:destport user@gate  # desthost as seen from the gate
# ssh -R destport:desthost:localport user@gate  # forwards your localport to destination
# ssh -X user@gate   # To force X forwarding

This will connect to gate and forward the local port to the host desthost:destport. Note desthost is the destination host as seen by the gate, so if the connection is to the gate, then desthost is localhost. More than one port forward is possible.

Direct forward on the gate

Let say we want to access the CVS (port 2401) and http (port 80) which are running on the gate. This is the simplest example, desthost is thus localhost, and we use the port 8080 locally instead of 80 so we don't need to be root. Once the ssh session is open, both services are accessible on the local ports.

# ssh -L 2401:localhost:2401 -L 8080:localhost:80 user@gate

Netbios and remote desktop forward to a second server

Let say a Windows smb server is behind the gate and is not running ssh. We need access to the smb share and also remote desktop to the server.

# ssh -L 139:smbserver:139 -L 3388:smbserver:3389 user@gate

The smb share can now be accessed with \\127.0.0.1\, but only if the local share is disabled, because the local share is listening on port 139.
It is possible to keep the local share enabled, for this we need to create a new virtual device with a new IP address for the tunnel, the smb share will be connected over this address. Furthermore the local RDP is already listening on 3389, so we choose 3388. For this example let's use a virtual IP of 10.1.1.1.

With putty use Source port=10.1.1.1:139. It is possible to create multiple loop devices and tunnel. On Windows 2000, only putty worked for me.
With the ssh.com client, disable "Allow local connections only". Since ssh.com will bind to all addresses, only a single share can be connected.

Now create the loopback interface with IP 10.1.1.1:

# System->Control Panel->Add Hardware # Yes, Hardware is already connected # Add a new hardware device (at bottom).
# Install the hardware that I manually select # Network adapters # Microsoft , Microsoft Loopback Adapter.
Configure the IP address of the fake device to 10.1.1.1 mask 255.255.255.0, no gateway.
advanced->WINS, Enable LMHosts Lookup; Disable NetBIOS over TCP/IP.
# Enable Client for Microsoft Networks. # Disable File and Printer Sharing for Microsoft Networks.

I HAD to reboot for this to work. Now connect to the smb share with \\10.1.1.1 and remote desktop to 10.1.1.1:3388.

Debug

If it is not working:

Are the ports forwarded: netstat -an? Look at 0.0.0.0:139 or 10.1.1.1:139
Does telnet 10.1.1.1 139 connect?
You need the checkbox "Local ports accept connections from other hosts".
Is "File and Printer Sharing for Microsoft Networks" disabled on the loopback interface?

Connect two clients behind NAT

Suppose two clients are behind a NAT gateway and client cliadmin has to connect to client cliuser (the destination), both can login to the gate with ssh and are running Linux with sshd. You don't need root access anywhere as long as the ports on gate are above 1024. We use 2022 on gate. Also since the gate is used locally, the option GatewayPorts is not necessary.
On client cliuser (from destination to gate):

# ssh -R 2022:localhost:22 user@gate            # forwards client 22 to gate:2022

On client cliadmin (from host to gate):

# ssh -L 3022:localhost:2022 admin@gate         # forwards client 3022 to gate:2022

Now the admin can connect directly to the client cliuser with:

# ssh -p 3022 admin@localhost                   # local:3022 -> gate:2022 -> client:22

Connect to VNC behind NAT

Suppose a Windows client with VNC listening on port 5900 has to be accessed from behind NAT. On client cliwin to gate:

# ssh -R 15900:localhost:5900 user@gate

On client cliadmin (from host to gate):

# ssh -L 5900:localhost:15900 admin@gate

Now the admin can connect directly to the client VNC with:

# vncconnect -display :0 localhost

VPN with SSH

As of version 4.3, OpenSSH can use the tun/tap device to encrypt a tunnel. This is very similar to other TLS based VPN solutions like OpenVPN. One advantage with SSH is that there is no need to install and configure additional software. Additionally the tunnel uses the SSH authentication like pre shared keys. The drawback is that the encapsulation is done over TCP which might result in poor performance on a slow link. Also the tunnel is relying on a single (fragile) TCP connection. This technique is very useful for a quick IP based VPN setup. There is no limitation as with the single TCP port forward, all layer 3/4 protocols like ICMP, TCP/UDP, etc. are forwarded over the VPN. In any case, the following options are needed in the sshd_conf file:

PermitRootLogin yes
PermitTunnel yes

Single P2P connection

Here we are connecting two hosts, hclient and hserver with a peer to peer tunnel. The connection is started from hclient to hserver and is done as root. The tunnel end points are 10.0.1.1 (server) and 10.0.1.2 (client) and we create a device tun5 (this could also be an other number). The procedure is very simple:

Connect with SSH using the tunnel option -w
Configure the IP addresses of the tunnel. Once on the server and once on the client.

Connect to the server

Connection started on the client and commands are executed on the server.

Server is on Linux

cli># ssh -w5:5 root@hserver
srv># ifconfig tun5 10.0.1.1 netmask 255.255.255.252   # Executed on the server shell

Server is on FreeBSD

cli># ssh -w5:5 root@hserver
srv># ifconfig tun5 10.0.1.1 10.0.1.2                  # Executed on the server shell

Configure the client

Commands executed on the client:

cli># ifconfig tun5 10.0.1.2 netmask 255.255.255.252   # Client is on Linux
cli># ifconfig tun5 10.0.1.2 10.0.1.1                  # Client is on FreeBSD

The two hosts are now connected and can transparently communicate with any layer 3/4 protocol using the tunnel IP addresses.

Connect two networks

In addition to the p2p setup above, it is more useful to connect two private networks with an SSH VPN using two gates. Suppose for the example, netA is 192.168.51.0/24 and netB 192.168.16.0/24. The procedure is similar as above, we only need to add the routing. NAT must be activated on the private interface only if the gates are not the same as the default gateway of their network.
192.168.51.0/24 (netA)|gateA <-> gateB|192.168.16.0/24 (netB)

Connect with SSH using the tunnel option -w.
Configure the IP addresses of the tunnel. Once on the server and once on the client.
Add the routing for the two networks.
If necessary, activate NAT on the private interface of the gate.

The setup is started from gateA in netA.

Connect from gateA to gateB

Connection is started from gateA and commands are executed on gateB.

gateB is on Linux

gateA># ssh -w5:5 root@gateB
gateB># ifconfig tun5 10.0.1.1 netmask 255.255.255.252 # Executed on the gateB shell
gateB># route add -net 192.168.51.0 netmask 255.255.255.0 dev tun5
gateB># echo 1 > /proc/sys/net/ipv4/ip_forward        # Only needed if not default gw
gateB># iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

gateB is on FreeBSD

gateA># ssh -w5:5 root@gateB                          # Creates the tun5 devices
gateB># ifconfig tun5 10.0.1.1 10.0.1.2               # Executed on the gateB shell
gateB># route add 192.168.51.0/24 10.0.1.2
gateB># sysctl net.inet.ip.forwarding=1               # Only needed if not default gw
gateB># natd -s -m -u -dynamic -n fxp0                # see NAT
gateA># sysctl net.inet.ip.fw.enable=1

Configure gateA

Commands executed on gateA:

gateA is on Linux

gateA># ifconfig tun5 10.0.1.2 netmask 255.255.255.252
gateA># route add -net 192.168.16.0 netmask 255.255.255.0 dev tun5
gateA># echo 1 > /proc/sys/net/ipv4/ip_forward
gateA># iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

gateA is on FreeBSD

gateA># ifconfig tun5 10.0.1.2 10.0.1.1
gateA># route add 192.168.16.0/24 10.0.1.2
gateA># sysctl net.inet.ip.forwarding=1
gateA># natd -s -m -u -dynamic -n fxp0                # see NAT
gateA># sysctl net.inet.ip.fw.enable=1

The two private networks are now transparently connected via the SSH VPN. The IP forward and NAT settings are only necessary if the gates are not the default gateways. In this case the clients would not know where to forward the response, and nat must be activated.

RSYNC

Rsync can almost completely replace cp and scp, furthermore interrupted transfers are efficiently restarted. A trailing slash (and the absence thereof) has different meanings, the man page is good... Here some examples:
Copy the directories with full content:

# rsync -a /home/colin/ /backup/colin/
# rsync -a /var/ /var_bak/
# rsync -aR --delete-during /home/user/ /backup/      # use relative (see below)

Same as before but over the network and with compression. Rsync uses SSH for the transport per default and will use the ssh key if they are set. Use ":" as with SCP. A typical remote copy:

# rsync -axSRzv /home/user/ user@server:/backup/user/

Exclude any directory tmp within /home/user/ and keep the relative folders hierarchy, that is the remote directory will have the structure /backup/home/user/. This is typically used for backups.

# rsync -azR --exclude /tmp/ /home/user/ user@server:/backup/

Use port 20022 for the ssh connection:

# rsync -az -e 'ssh -p 20022' /home/colin/ user@server:/backup/colin/

Using the rsync daemon (used with "::") is much faster, but not encrypted over ssh. The location of /backup is defined by the configuration in /etc/rsyncd.conf. The variable RSYNC_PASSWORD can be set to avoid the need to enter the password manually.

# rsync -axSRz /home/ ruser@hostname::rmodule/backup/
# rsync -axSRz ruser@hostname::rmodule/backup/ /home/    # To copy back

Some important options:

-a, --archive archive mode; same as -rlptgoD (no -H)
-r, --recursive recurse into directories
-R, --relative use relative path names
-H, --hard-links preserve hard links
-S, --sparse handle sparse files efficiently
-x, --one-file-system don't cross file system boundaries
--exclude=PATTERN exclude files matching PATTERN
--delete-during receiver deletes during xfer, not before
--delete-after receiver deletes after transfer, not before

Rsync on Windows

Rsync is available for Windows through cygwin or as stand-alone packaged in cwrsynchttp://sourceforge.net/projects/sereds. This is very convenient for automated backups. Install one of them (not both) and add the path to the Windows system variables: # Control Panel -> System -> tab Advanced, button Environment Variables. Edit the "Path" system variable and add the full path to the installed rsync, e.g. C:\Program Files\cwRsync\bin or C:\cygwin\bin. This way the commands rsync and ssh are available in a Windows command shell.

Public key authentication

Rsync is automatically tunneled over SSH and thus uses the SSH authentication on the server. Automatic backups have to avoid a user interaction, for this the SSH public key authentication can be used and the rsync command will run without a password.
All the following commands are executed within a Windows console. In a console (Start -> Run -> cmd) create and upload the key as described in SSH, change "user" and "server" as appropriate. If the file authorized_keys2 does not exist yet, simply copy id_dsa.pub to authorized_keys2 and upload it.

# ssh-keygen -t dsa -N ''                   # Creates a public and a private key
# rsync user@server:.ssh/authorized_keys2 . # Copy the file locally from the server
# cat id_dsa.pub >> authorized_keys2        # Or use an editor to add the key
# rsync authorized_keys2 user@server:.ssh/  # Copy the file back to the server
# del authorized_keys2                      # Remove the local copy

Now test it with (in one line):

rsync -rv "/cygdrive/c/Documents and Settings/%USERNAME%/My Documents/" \
'user@server:My\ Documents/'

Automatic backup

Use a batch file to automate the backup and add the file in the scheduled tasks (Programs -> Accessories -> System Tools -> Scheduled Tasks). For example create the file backup.bat and replace user@server.

@ECHO OFF
REM rsync the directory My Documents
SETLOCAL
SET CWRSYNCHOME=C:\PROGRAM FILES\CWRSYNC
SET CYGWIN=nontsec
SET CWOLDPATH=%PATH%
REM uncomment the next line when using cygwin
SET PATH=%CWRSYNCHOME%\BIN;%PATH%
echo Press Control-C to abort
rsync -av "/cygdrive/c/Documents and Settings/%USERNAME%/My Documents/" \
'user@server:My\ Documents/'
pause

SUDO

Sudo is a standard way to give users some administrative rights without giving out the root password. Sudo is very useful in a multi user environment with a mix of server and workstations. Simply call the command with sudo:

# sudo /etc/init.d/dhcpd restart            # Run the rc script as root
# sudo -u sysadmin whoami                   # Run cmd as an other user

Configuration

Sudo is configured in /etc/sudoers and must only be edited with visudo. The basic syntax is (the lists are comma separated):

user hosts = (runas) commands          # In /etc/sudoers

users one or more users or %group (like %wheel) to gain the rights
hosts list of hosts (or ALL)
runas list of users (or ALL) that the command rule can be run as. It is enclosed in ( )!
commands list of commands (or ALL) that will be run as root or as (runas)

Additionally those keywords can be defined as alias, they are called User_Alias, Host_Alias, Runas_Alias and Cmnd_Alias. This is useful for larger setups. Here a sudoers example:

# cat /etc/sudoers
# Host aliases are subnets or hostnames.
Host_Alias   DMZ     = 212.118.81.40/28
Host_Alias   DESKTOP = work1, work2

# User aliases are a list of users which can have the same rights
User_Alias   ADMINS  = colin, luca, admin
User_Alias   DEVEL   = joe, jack, julia
Runas_Alias  DBA     = oracle,pgsql

# Command aliases define the full path of a list of commands
Cmnd_Alias   SYSTEM  = /sbin/reboot,/usr/bin/kill,/sbin/halt,/sbin/shutdown,/etc/init.d/
Cmnd_Alias   PW      = /usr/bin/passwd [A-z]*, !/usr/bin/passwd root # Not root pwd!
Cmnd_Alias   DEBUG   = /usr/sbin/tcpdump,/usr/bin/wireshark,/usr/bin/nmap

# The actual rules
root,ADMINS  ALL     = (ALL) NOPASSWD: ALL    # ADMINS can do anything w/o a password.
DEVEL        DESKTOP = (ALL) NOPASSWD: ALL    # Developers have full right on desktops
DEVEL        DMZ     = (ALL) NOPASSWD: DEBUG  # Developers can debug the DMZ servers.

# User sysadmin can mess around in the DMZ servers with some commands.
sysadmin     DMZ     = (ALL) NOPASSWD: SYSTEM,PW,DEBUG
sysadmin     ALL,!DMZ = (ALL) NOPASSWD: ALL   # Can do anything outside the DMZ.
%dba         ALL     = (DBA) ALL              # Group dba can run as database user.

# anyone can mount/unmount a cd-rom on the desktop machines
ALL          DESKTOP = NOPASSWD: /sbin/mount /cdrom,/sbin/umount /cdrom

Encrypt Files

A single file

Encrypt and decrypt:

# openssl des -salt -in file -out file.des
# openssl des -d -salt -in file.des -out file

Note that the file can of course be a tar archive.

tar and encrypt a whole directory

# tar -cf - directory | openssl des -salt -out directory.tar.des      # Encrypt
# openssl des -d -salt -in directory.tar.des | tar -x                 # Decrypt

tar zip and encrypt a whole directory

# tar -zcf - directory | openssl des -salt -out directory.tar.gz.des  # Encrypt
# openssl des -d -salt -in directory.tar.gz.des | tar -xz             # Decrypt

Use -k mysecretpassword after des to avoid the interactive password request. However note that this is highly insecure.
Use des3 instead of des to get even stronger encryption (Triple-DES Cipher). This uses also more CPU.

Encrypt Partitions

Linux with LUKS | Linux dm-crypt only | FreeBSD GELI | FBSD pwd only

There are (many) other alternative methods to encrypt disks, I only show here the methods I know and use. Keep in mind that the security is only good as long the OS has not been tempered with. An intruder could easily record the password from the keyboard events. Furthermore the data is freely accessible when the partition is attached and will not prevent an intruder to have access to it in this state.

Linux

Those instructions use the Linux dm-crypt (device-mapper) facility available on the 2.6 kernel. In this example, lets encrypt the partition /dev/sdc1, it could be however any other partition or disk, or USB or a file based partition created with losetup. In this case we would use /dev/loop0. See file image partition. The device mapper uses labels to identify a partition. We use sdc1 in this example, but it could be any string.

dm-crypt with LUKS

LUKS with dm-crypt has better encryption and makes it possible to have multiple passphrase for the same partition or to change the password easily. To test if LUKS is available, simply type # cryptsetup --help, if nothing about LUKS shows up, use the instructions below Without LUKS. First create a partition if necessary: fdisk /dev/sdc.

Create encrypted partition

# dd if=/dev/urandom of=/dev/sdc1          # Optional. For paranoids only (takes days)
# cryptsetup -y luksFormat /dev/sdc1       # This destroys any data on sdc1
# cryptsetup luksOpen /dev/sdc1 sdc1
# mkfs.ext3 /dev/mapper/sdc1               # create ext3 file system
# mount -t ext3 /dev/mapper/sdc1 /mnt
# umount /mnt
# cryptsetup luksClose sdc1                # Detach the encrypted partition

Attach

# cryptsetup luksOpen /dev/sdc1 sdc1
# mount -t ext3 /dev/mapper/sdc1 /mnt

Detach

# umount /mnt
# cryptsetup luksClose sdc1

dm-crypt without LUKS

# cryptsetup -y create sdc1 /dev/sdc1      # or any other partition like /dev/loop0
# dmsetup ls                               # check it, will display: sdc1 (254, 0)
# mkfs.ext3 /dev/mapper/sdc1               # This is done only the first time!
# mount -t ext3 /dev/mapper/sdc1 /mnt
# umount /mnt/
# cryptsetup remove sdc1                   # Detach the encrypted partition

Do exactly the same (without the mkfs part!) to re-attach the partition. If the password is not correct, the mount command will fail. In this case simply remove the map sdc1 (cryptsetup remove sdc1) and create it again.

FreeBSD

The two popular FreeBSD disk encryption modules are gbde and geli. I now use geli because it is faster and also uses the crypto device for hardware acceleration. See The FreeBSD handbook Chapter 18.6http://www.freebsd.org/handbook/disks-encrypting.html for all the details. The geli module must be loaded or compiled into the kernel:

options GEOM_ELI
device crypto                                       # or as module:
# echo 'geom_eli_load="YES"' >> /boot/loader.conf   # or do: kldload geom_eli

Use password and key

I use those settings for a typical disk encryption, it uses a passphrase AND a key to encrypt the master key. That is you need both the password and the generated key /root/ad1.key to attach the partition. The master key is stored inside the partition and is not visible. See below for typical USB or file based image.

Create encrypted partition

# dd if=/dev/random of=/root/ad1.key bs=64 count=1  # this key encrypts the mater key
# geli init -s 4096 -K /root/ad1.key /dev/ad1       # -s 8192 is also OK for disks
# geli attach -k /root/ad1.key /dev/ad1             # DO make a backup of /root/ad1.key
# dd if=/dev/random of=/dev/ad1.eli bs=1m           # Optional and takes a long time
# newfs /dev/ad1.eli                                # Create file system
# mount /dev/ad1.eli /mnt

Attach

# geli attach -k /root/ad1.key /dev/ad1
# fsck -ny -t ffs /dev/ad1.eli                      # In doubt check the file system
# mount /dev/ad1.eli /mnt

Detach

The detach procedure is done automatically on shutdown.

# umount /mnt
# geli detach /dev/ad1.eli

/etc/fstab

The encrypted partition can be configured to be mounted with /etc/fstab. The password will be prompted when booting. The following settings are required for this example:

# grep geli /etc/rc.conf
geli_devices="ad1"
geli_ad1_flags="-k /root/ad1.key"
# grep geli /etc/fstab
/dev/ad1.eli         /home/private              ufs             rw      0       0

Use password only

It is more convenient to encrypt a USB stick or file based image with a passphrase only and no key. In this case it is not necessary to carry the additional key file around. The procedure is very much the same as above, simply without the key file. Let's encrypt a file based image /cryptedfile of 1 GB.

# dd if=/dev/zero of=/cryptedfile bs=1M count=1000  # 1 GB file
# mdconfig -at vnode -f /cryptedfile
# geli init /dev/md0                                # encrypts with password only
# geli attach /dev/md0
# newfs -U -m 0 /dev/md0.eli
# mount /dev/md0.eli /mnt
# umount /dev/md0.eli
# geli detach md0.eli

It is now possible to mount this image on an other system with the password only.

# mdconfig -at vnode -f /cryptedfile
# geli attach /dev/md0
# mount /dev/md0.eli /mnt

SSL Certificates

So called SSL/TLS certificates are cryptographic public key certificates and are composed of a public and a private key. The certificates are used to authenticate the endpoints and encrypt the data. They are used for example on a web server (https) or mail server (imaps).

Procedure

We need a certificate authority to sign our certificate. This step is usually provided by a vendor like Thawte, Verisign, etc., however we can also create our own.
Create a certificate signing request. This request is like an unsigned certificate (the public part) and already contains all necessary information. The certificate request is normally sent to the authority vendor for signing. This step also creates the private key on the local machine.
Sign the certificate with the certificate authority.
If necessary join the certificate and the key in a single file to be used by the application (web server, mail server etc.).

Configure OpenSSL

We use /usr/local/certs as directory for this example check or edit /etc/ssl/openssl.cnf accordingly to your settings so you know where the files will be created. Here are the relevant part of openssl.cnf:

[ CA_default ]
dir             = /usr/local/certs/CA       # Where everything is kept
certs           = $dir/certs                # Where the issued certs are kept
crl_dir         = $dir/crl                  # Where the issued crl are kept
database        = $dir/index.txt            # database index file.

Make sure the directories exist or create them

# mkdir -p /usr/local/certs/CA
# cd /usr/local/certs/CA
# mkdir certs crl newcerts private
# echo "01" > serial                        # Only if serial does not exist
# touch index.txt

Create a certificate authority

If you do not have a certificate authority from a vendor, you'll have to create your own. This step is not necessary if one intend to use a vendor to sign the request. To make a certificate authority (CA):

# openssl req -new -x509 -days 730 -config /etc/ssl/openssl.cnf \
-keyout CA/private/cakey.pem -out CA/cacert.pem

Create a certificate signing request

To make a new certificate (for mail server or web server for example), first create a request certificate with its private key. If your application do not support encrypted private key (for example UW-IMAP does not), then disable encryption with -nodes.

# openssl req -new -keyout newkey.pem -out newreq.pem \
-config /etc/ssl/openssl.cnf
# openssl req -nodes -new -keyout newkey.pem -out newreq.pem \
-config /etc/ssl/openssl.cnf                # No encryption for the key

Sign the certificate

The certificate request has to be signed by the CA to be valid, this step is usually done by the vendor. Note: replace "servername" with the name of your server in the next commands.

# cat newreq.pem newkey.pem > new.pem
# openssl ca -policy policy_anything -out servernamecert.pem \
-config /etc/ssl/openssl.cnf -infiles new.pem
# mv newkey.pem servernamekey.pem

Now servernamekey.pem is the private key and servernamecert.pem is the server certificate.

Create united certificate

The IMAP server wants to have both private key and server certificate in the same file. And in general, this is also easier to handle, but the file has to be kept securely!. Apache also can deal with it well. Create a file servername.pem containing both the certificate and key.

Open the private key (servernamekey.pem) with a text editor and copy the private key into the "servername.pem" file.
Do the same with the server certificate (servernamecert.pem).

The final servername.pem file should look like this:

-----BEGIN RSA PRIVATE KEY-----
MIICXQIBAAKBgQDutWy+o/XZ/[...]qK5LqQgT3c9dU6fcR+WuSs6aejdEDDqBRQ
-----END RSA PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIIERzCCA7CgAwIBAgIBBDANB[...]iG9w0BAQQFADCBxTELMAkGA1UEBhMCREUx
-----END CERTIFICATE-----

What we have now in the directory /usr/local/certs/:

CA/private/cakey.pem (CA server private key)
CA/cacert.pem (CA server public key)
certs/servernamekey.pem (server private key)
certs/servernamecert.pem (server signed certificate)
certs/servername.pem (server certificate with private key)

Keep the private key secure!

View certificate information

To view the certificate information simply do:

# openssl x509 -text -in servernamecert.pem      # View the certificate info
# openssl req -noout -text -in server.csr        # View the request info

CVS

Server setup | CVS test | SSH tunneling | CVS usage

Server setup

Initiate the CVS

Decide where the main repository will rest and create a root cvs. For example /usr/local/cvs (as root):

# mkdir -p /usr/local/cvs
# setenv CVSROOT /usr/local/cvs      # Set CVSROOT to the new location (local)
# cvs init                           # Creates all internal CVS config files
# cd /root
# cvs checkout CVSROOT               # Checkout the config files to modify them
# cd CVSROOT
edit config ( fine as it is)
# cvs commit config
cat >> writers                       # Create a writers file (optionally also readers)
colin
^D                                   # Use [Control][D] to quit the edit
# cvs add writers                    # Add the file writers into the repository
# cvs edit checkoutlist
# cat >> checkoutlist
writers
^D                                   # Use [Control][D] to quit the edit
# cvs commit                         # Commit all the configuration changes

Add a readers file if you want to differentiate read and write permissions Note: Do not (ever) edit files directly into the main cvs, but rather checkout the file, modify it and check it in. We did this with the file writers to define the write access.
There are three popular ways to access the CVS at this point. The first two don't need any further configuration. See the examples on CVSROOT below for how to use them:

Direct local access to the file system. The user(s) need sufficient file permission to access the CS directly and there is no further authentication in addition to the OS login. However this is only useful if the repository is local.
Remote access with ssh with the ext protocol. Any use with an ssh shell account and read/write permissions on the CVS server can access the CVS directly with ext over ssh without any additional tunnel. There is no server process running on the CVS for this to work. The ssh login does the authentication.
Remote access with pserver. This is the preferred use for larger user base as the users are authenticated by the CVS pserver with a dedicated password database, there is therefore no need for local users accounts. This setup is explained below.

Network setup with inetd

The CVS can be run locally only if a network access is not needed. For a remote access, the daemon inetd can start the pserver with the following line in /etc/inetd.conf (/etc/xinetd.d/cvs on SuSE):

cvspserver stream  tcp  nowait  cvs  /usr/bin/cvs cvs \
--allow-root=/usr/local/cvs pserver

It is a good idea to block the cvs port from the Internet with the firewall and use an ssh tunnel to access the repository remotely.

Separate authentication

It is possible to have cvs users which are not part of the OS (no local users). This is actually probably wanted too from the security point of view. Simply add a file named passwd (in the CVSROOT directory) containing the users login and password in the crypt format. This is can be done with the apache htpasswd tool.
Note: This passwd file is the only file which has to be edited directly in the CVSROOT directory. Also it won't be checked out. More info with htpasswd --help

# htpasswd -cb passwd user1 password1  # -c creates the file
# htpasswd -b passwd user2 password2

Now add :cvs at the end of each line to tell the cvs server to change the user to cvs (or whatever your cvs server is running under). It looks like this:

# cat passwd
user1:xsFjhU22u8Fuo:cvs
user2:vnefJOsnnvToM:cvs

Test it

Test the login as normal user (for example here me)

# cvs -d :pserver:colin@192.168.50.254:/usr/local/cvs login
Logging in to :pserver:colin@192.168.50.254:2401/usr/local/cvs
CVS password:

CVSROOT variable

This is an environment variable used to specify the location of the repository we're doing operations on. For local use, it can be just set to the directory of the repository. For use over the network, the transport protocol must be specified. Set the CVSROOT variable with setenv CVSROOT string on a csh, tcsh shell, or with export CVSROOT=string on a sh, bash shell.

# setenv CVSROOT :pserver:@:/cvsdirectory
For example:
# setenv CVSROOT /usr/local/cvs                               # Used locally only
# setenv CVSROOT :local:/usr/local/cvs                        # Same as above
# setenv CVSROOT :ext:user@cvsserver:/usr/local/cvs           # Direct access with SSH
# setenv CVS_RSH ssh                                          # for the ext access
# setenv CVSROOT :pserver:user@cvsserver.254:/usr/local/cvs   # network with pserver

When the login succeeded one can import a new project into the repository: cd into your project root directory

cvs import   
cvs -d :pserver:colin@192.168.50.254:/usr/local/cvs import MyProject MyCompany START

Where MyProject is the name of the new project in the repository (used later to checkout). Cvs will import the current directory content into the new project.

To checkout:

# cvs -d :pserver:colin@192.168.50.254:/usr/local/cvs checkout MyProject
or
# setenv CVSROOT :pserver:colin@192.168.50.254:/usr/local/cvs
# cvs checkout MyProject

SSH tunneling for CVS

We need 2 shells for this. On the first shell we connect to the cvs server with ssh and port-forward the cvs connection. On the second shell we use the cvs normally as if it where running locally.
on shell 1:

# ssh -L2401:localhost:2401 colin@cvs_server   # Connect directly to the CVS server. Or:
# ssh -L2401:cvs_server:2401 colin@gateway     # Use a gateway to reach the CVS

on shell 2:

# setenv CVSROOT :pserver:colin@localhost:/usr/local/cvs
# cvs login
Logging in to :pserver:colin@localhost:2401/usr/local/cvs
CVS password:
# cvs checkout MyProject/src

CVS commands and usage

Import

The import command is used to add a whole directory, it must be run from within the directory to be imported. Say the directory /devel/ contains all files and subdirectories to be imported. The directory name on the CVS (the module) will be called "myapp".

# cvs import [options] directory-name vendor-tag release-tag
# cd /devel                          # Must be inside the project to import it
# cvs import myapp Company R1_0      # Release tag can be anything in one word

After a while a new directory "/devel/tools/" was added and it has to be imported too.

# cd /devel/tools
# cvs import myapp/tools Company R1_0

Checkout update add commit

# cvs co myapp/tools                 # Will only checkout the directory tools
# cvs co -r R1_1 myapp               # Checkout myapp at release R1_1 (is sticky)
# cvs -q -d update -P                # A typical CVS update
# cvs update -A                      # Reset any sticky tag (or date, option)
# cvs add newfile                    # Add a new file
# cvs add -kb newfile                # Add a new binary file
# cvs commit file1 file2             # Commit the two files only
# cvs commit -m "message"            # Commit all changes done with a message

Create a patch

It is best to create and apply a patch from the working development directory related to the project, or from within the source directory.

# cd /devel/project
# diff -Naur olddir newdir > patchfile # Create a patch from a directory or a file
# diff -Naur oldfile newfile > patchfile

Apply a patch

Sometimes it is necessary to strip a directory level from the patch, depending how it was created. In case of difficulties, simply look at the first lines of the patch and try -p0, -p1 or -p2.

# cd /devel/project
# patch --dry-run -p0 < class="cmt"># Test the path without applying it
# patch -p0 < class="cmt"># strip off the 1st level from the path

SVN

Server setup | SVN+SSH | SVN over http | SVN usage

Subversion (SVN)http://subversion.tigris.org/ is a version control system designed to be the successor of CVS (Concurrent Versions System). The concept is similar to CVS, but many shortcomings where improved. See also the SVN bookhttp://svnbook.red-bean.com/en/1.4/.

Server setup

The initiation of the repository is fairly simple (here for example /home/svn/ must exist):

# svnadmin create --fs-type fsfs /home/svn/project1

Now the access to the repository is made possible with:

file:// Direct file system access with the svn client with. This requires local permissions on the file system.
svn:// or svn+ssh:// Remote access with the svnserve server (also over SSH). This requires local permissions on the file system.
http:// Remote access with webdav using apache. No local users are necessary for this method.

Using the local file system, it is now possible to import and then check out an existing project. Unlike with CVS it is not necessary to cd into the project directory, simply give the full path:

# svn import /project1/ file:///home/svn/project1/trunk -m 'Initial import'
# svn checkout file:///home/svn/project1

The new directory "trunk" is only a convention, this is not required.

Remote access with ssh

No special setup is required to access the repository via ssh, simply replace file:// with svn+ssh/hostname. For example:

# svn checkout svn+ssh://hostname/home/svn/project1

As with the local file access, every user needs an ssh access to the server (with a local account) and also read/write access. This method might be suitable for a small group. All users could belong to a subversion group which owns the repository, for example:

# groupadd subversion
# groupmod -A user1 subversion
# chown -R root:subversion /home/svn
# chmod -R 770 /home/svn

Remote access with http (apache)

Remote access over http (https) is the only good solution for a larger user group. This method uses the apache authentication, not the local accounts. This is a typical but small apache configuration:

LoadModule dav_module         modules/mod_dav.so
LoadModule dav_svn_module     modules/mod_dav_svn.so
LoadModule authz_svn_module   modules/mod_authz_svn.so    # Only for access control


DAV svn
# any "/svn/foo" URL will map to a repository /home/svn/foo
SVNParentPath /home/svn
AuthType Basic
AuthName "Subversion repository"
AuthzSVNAccessFile /etc/apache2/svn.acl
AuthUserFile /etc/apache2/svn-passwd
Require valid-user

The apache server needs full access to the repository:

# chown -R www:www /home/svn

Create a user with htpasswd2:

# htpasswd -c /etc/svn-passwd user1  # -c creates the file

Access control svn.acl example

# Default it read access. "* =" would be default no access
[/]
* = r
[groups]
project1-developers = joe, jack, jane
# Give write access to the developers
[project1:]
@project1-developers = rw

SVN commands and usage

See also the Subversion Quick Reference Cardhttp://www.cs.put.poznan.pl/csobaniec/Papers/svn-refcard.pdf. Tortoise SVNhttp://tortoisesvn.tigris.org is a nice Windows interface.

Import

A new project, that is a directory with some files, is imported into the repository with the import command. Import is also used to add a directory with its content to an existing project.

# svn help import                                # Get help for any command
    # Add a new directory (with content) into the src dir on project1
# svn import /project1/newdir http://host.url/svn/project1/trunk/src -m 'add newdir'

Typical SVN commands

# svn co http://host.url/svn/project1/trunk      # Checkout the most recent version
    # Tags and branches are created by copying
# svn mkdir http://host.url/svn/project1/tags/   # Create the tags directory
# svn copy -m "Tag rc1 rel." http://host.url/svn/project1/trunk \
                      http://host.url/svn/project1/tags/1.0rc1
# svn status [--verbose]                         # Check files status into working dir
# svn add src/file.h src/file.cpp                # Add two files
# svn commit -m 'Added new class file'           # Commit the changes with a message
# svn ls http://host.url/svn/project1/tags/      # List all tags
# svn move foo.c bar.c                           # Move (rename) files
# svn delete some_old_file                       # Delete files

Useful Commands

less

The less command displays a text document on the console. It is present on most installation.

# less unixtoolbox.xhtml

Some important commands are (^N stands for [control]-[N]):

h H good help on display
f ^F ^V SPACE Forward one window (or N lines).
b ^B ESC-v Backward one window (or N lines).
F Forward forever; like "tail -f".
/pattern Search forward for (N-th) matching line.
?pattern Search backward for (N-th) matching line.
n Repeat previous search (for N-th occurrence).
N Repeat previous search in reverse direction.
q quit

vi

Vi is present on ANY Linux/Unix installation and it is therefore useful to know some basic commands. There are two modes: command mode and insertion mode. The commands mode is accessed with [ESC], the insertion mode with i.

Quit

:w newfilename save the file to newfilename
:wq or :x save and quit
:q! quit without saving

Search and move

/string Search forward for string
?string Search back for string
n Search for next instance of string
N Search for previous instance of string
{ Move a paragraph back
} Move a paragraph forward
1G Move to the first line of the file
nG Move to the n th line of the file
G Move to the last line of the file
:%s/OLD/NEW/g Search and replace every occurrence

Delete text

dd delete current line
D Delete to the end of the line
dw Delete word
x Delete character
u Undo last
U Undo all changes to current line

mail

The mail command is a basic application to read and send email, it is usually installed. To send an email simply type "mail user@domain". The first line is the subject, then the mail content. Terminate and send the email with a single dot (.) in a new line. Example:

# mail c@cb.vu
Subject: Your text is full of typos
"For a moment, nothing happened. Then, after a second or so,
nothing continued to happen."
.
EOT
#

This is also working with a pipe:

# echo "This is the mail body" | mail c@cb.vu

This is also a simple way to test the mail server.

tar

The command tar (tape archive) creates and extracts archives of file and directories. The archive .tar is uncompressed, a compressed archive has the extension .tgz or .tar.gz (zip) or .tbz (bzip2). Do not use absolute path when creating an archive, you probably want to unpack it somewhere else. Some typical commands are:

Create

# cd /
# tar -cf home.tar home/        # archive the whole /home directory (c for create)
# tar -czf home.tgz home/       # same with zip compression
# tar -cjf home.tbz home/       # same with bzip2 compression

Only include one (or two) directories from a tree, but keep the relative structure. For example archive /usr/local/etc and /usr/local/www and the first directory in the archive should be local/.

# tar -C /usr -czf local.tgz local/etc local/www
# tar -C /usr -xzf local.tgz    # To untar the local dir into /usr
# cd /usr; tar -xzf local.tgz   # Is the same as above

Extract

# tar -tzf home.tgz             # look inside the archive without extracting (list)
# tar -xf home.tar              # extract the archive here (x for extract)
# tar -xzf home.tgz             # same with zip compression
# tar -xjf home.tgz             # same with bzip2 compression
# tar -xjf home.tgz home/colin/file.txt    # Restore a single file

More advanced

# tar c dir/ | gzip | ssh user@remote 'dd of=dir.tgz' # arch dir/ and store remotely.
# tar cvf - `find . -print` > backup.tar              # arch the current directory.
# tar -cf - -C /etc . | tar xpf - -C /backup/etc      # Copy directories
# tar -cf - -C /etc . | ssh user@remote tar xpf - -C /backup/etc      # Remote copy.
# tar -czf home.tgz --exclude '*.o' --exclude 'tmp/' home/

dd

The program dd (disk dump) is used to copy partitions and disks and for other copy tricks. Typical usage:

# dd if= of= bs= conv=

Important conv options:

notrunc do not truncate the output file, all zeros will be written as zeros.
noerror continue after read errors (e.g. bad blocks)
sync pad every input block with Nulls to ibs-size

The default byte size is 512 (one block). The MBR, where the partiton table is located, is on the first block, the first 63 blocks of a disk are empty. Larger byte sizes are faster to copy but require also more memory.

Backup and restore

# dd if=/dev/hda of=/dev/hdc bs=16065b                # Copy disk to disk (same size)
# dd if=/dev/sda7 of /home/root.img bs=4096 conv=notrunc,noerror # Backup /
# dd if /home/root.img of=/dev/sda7 bs=4096 conv=notrunc,noerror # Restore /
# dd bs=1M if=/dev/ad4s3e | gzip -c > ad4s3e.gz                  # Zip the backup
# gunzip -dc ad4s3e.gz | dd of=/dev/ad0s3e bs=1M                 # Restore the zip
# dd bs=1M if=/dev/ad4s3e | gzip | ssh eedcoba@fry 'dd of=ad4s3e.gz' # also remote
# gunzip -dc ad4s3e.gz | ssh eedcoba@host 'dd of=/dev/ad0s3e bs=1M'
# dd if=/dev/ad0 of=/dev/ad2 skip=1 seek=1 bs=4k conv=noerror    # Skip MBR
# This is necessary if the destination (ad2) is smaller.

Recover

The command dd will read every single block of the partiton, even the blocks. In case of problems it is better to use the option conv=sync,noerror so dd will skip the bad block and write zeros at the destination. Accordingly it is important to set the block size equal or smaller than the disk block size. A 1k size seems safe, set it with bs=1k. If a disk has bad sectors and the data should be recovered from a partiton, create an image file with dd, mount the image and copy the content to a new disk. With the option noerror, dd will skip the bad sectors and write zeros instead, thus only the data contained in the bad sectors will be lost.

# dd if=/dev/hda of=/dev/null bs=1m                   # Check for bad blocks
# dd bs=1k if=/dev/hda1 conv=sync,noerror,notrunc | gzip | ssh \ # Send to remote
root@fry 'dd of=hda1.gz bs=1k'
# dd bs=1k if=/dev/hda1 conv=sync,noerror,notrunc of=hda1.img    # Store into an image
# mount -o loop /hda1.img /mnt                        # Mount the image
# rsync -ax /mnt/ /newdisk/                           # Copy on a new disk
# dd if=/dev/hda of=/dev/hda                          # Refresh the magnetic state
# The above is useful to refresh a disk. It is perfectly safe, but must be unmounted.

Delete

# dd if=/dev/zero of=/dev/hdc count=1                 # Delete MBR and partiton table
# dd if=/dev/zero of=/dev/hdc                         # Delete full disk
# dd if=/dev/urandom of=/dev/hdc                      # Delete full disk better
# kill -USR1 PID                                      # View dd progress (Linux only!)

screen

Screen has two main functionalities:

Run multiple terminal session within a single terminal.
A started program is decoupled from the real terminal and can thus run in the background. The real terminal can be closed and reattached later.

Short start example

start screen with:

# screen

Within the screen session we can start a long lasting program (like top). Detach the terminal and reattach the same terminal from an other machine (over ssh for example).

# top

Now detach with Ctrl-a Ctrl-d. Reattach the terminal with

# screen -r

or better:

# screen -R -D

Attach here and now. In detail this means: If a session is running, then reattach. If necessary detach and logout remotely first. If it was not running create it and notify the user.

Screen commands (within screen)

All screen commands start with Ctrl-a.

Ctrl-a ? help and summary of functions
Ctrl-a c create an new window (terminal)
Ctrl-a Ctrl-n and Ctrl-a Ctrl-p to switch to the next or previous window in the list, by number.
Ctrl-a Ctrl-N where N is a number from 0 to 9, to switch to the corresponding window.
Ctrl-a " to get a navigable list of running windows
Ctrl-a a to clear a missed Ctrl-a
Ctrl-a Ctrl-d to disconnect and leave the session running in the background
Ctrl-a x lock the screen terminal with a password

The screen session is terminated when the program within the running terminal is closed and you logout from the terminal.

Find

Some important options:

-x (on BSD) -xdev (on Linux) Stay on the same file system (dev in fstab).
-exec cmd {} \; Execute the command and replace {} with the full path
-iname Like -name but is case insensitive
-ls Display information about the file (like ls -la)
-size n n is +-n (k M G T P)
-cmin n File's status was last changed n minutes ago.

# find . -type f ! -perm -444        # Find files not readable by all
# find . -type d ! -perm -111        # Find dirs not accessible by all
# find /home/user/ -cmin 10 -print   # Files created or modified in the last 10 min.
# find . -name '*.[ch]' | xargs grep -E 'expr' # Search 'expr' in this dir and below.
# find / -name "*.core" | xargs rm   # Find core dumps and delete them
# find / -name "*.core" -print -exec rm {} \;  # Other syntax
# find . \( -name "*.png" -o -name "*.jpg" \) -print
                              # iname is not case sensitive
# find . \( -iname "*.png" -o -iname "*.jpg" \) -print -exec tar -rf images.tar {} \;
# find . -type f -name "*.txt" ! -name README.txt -print  # Exclude README.txt files
# find /var/ -size +1M -exec ls -lh {} \;
# find /var/ -size +1M -ls           # This is simpler
# find . -size +10M -size -50M -print
# find /usr/ports/ -name work -type d -print -exec rm -rf {} \;  # Clean the ports
Find files with SUID; those file have to be kept secure
# find / -type f -user root -perm -4000 -exec ls -l {} \;

Miscellaneous

# which command                      # Show full path name of command
# time command                       # See how long a command takes to execute
# time cat                           # Use time as stopwatch. Ctrl-c to stop
# set | grep $USER                   # List the current environment
# cal -3                             # Display a three month calendar
# date [-u|--utc|--universal] [MMDDhhmm[[CC]YY][.ss]]
# date 10022155                      # Set date and time
# whatis grep                        # Display a short info on the command or word
# whereis java                       # Search path and standard directories for word
# setenv varname value               # Set env. variable varname to value (csh/tcsh)
# export varname="value"             # set env. variable varname to value (sh/ksh/bash)
# pwd                                # Print working directory
# mkdir -p /path/to/dir              # no error if existing, make parent dirs as needed
# rmdir /path/to/dir                 # Remove directory
# rm -rf /path/to/dir                # Remove directory and its content (force)
# cp -la /dir1 /dir2                 # Archive and hard link files instead of copy
# cp -lpR /dir1 /dir2                # Same for FreeBSD
# mv /dir1 /dir2                     # Rename a directory

Install Software

List installed packages

# rpm -qa                            # List installed packages (RH, SuSE, RPM based)
# dpkg -l                            # Debian, Ubuntu
# pkg_info                           # FreeBSD list all installed packages
# pkg_info -W smbd                   # FreeBSD show which package smbd belongs to
# pkginfo                            # Solaris

Add/remove software

Front ends: yast2/yast for SuSE, redhat-config-packages for Red Hat.

# rpm -i pkgname.rpm                 # install the package (RH, SuSE, RPM based)
# rpm -e pkgname                     # Remove package

Debian

# apt-get update                     # First update the package lists
# apt-get install emacs              # Install the package emacs
# dpkg --remove emacs                # Remove the package emacs

FreeBSD

# pkg_add -r rsync                   # Fetch and install rsync.
# pkg_delete /var/db/pkg/rsync-xx    # Delete the rsync package

Set where the packages are fetched from with the PACKAGESITE variable. For example:

# export PACKAGESITE=ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages/Latest/
# or ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/

FreeBSD ports

The port tree /usr/ports/ is a collection of software ready to compile and install. The ports are updated with the program portsnap.

# portsnap fetch extract             # Create the tree when running the first time
# portsnap fetch update              # Update the port tree
# cd /usr/ports/net/rsync/           # Select the package to install
# make install distclean             # Install and cleanup (also see man ports)
# make package                       # Make a binary package for the port

Library path

Due to complex dependencies and runtime linking, programs are difficult to copy to an other system or distribution. However for small programs with little dependencies, the missing libraries can be copied over. The runtime libraries (and the missing one) are checked with ldd and managed with ldconfig.

# ldd /usr/bin/rsync                 # List all needed runtime libraries
# ldconfig -n /path/to/libs/         # Add a path to the shared libraries directories
# ldconfig -m /path/to/libs/         # FreeBSD
# LD_LIBRARY_PATH                    # The variable set the link library path

Convert Media

Sometimes one simply need to convert a video, audio file or document to another format.

Text encoding

Text encoding can get totally wrong, specially when the language requires special characters like àäç. The command iconv can convert from one encoding to an other.

# iconv -f  -t  
# iconv -f ISO8859-1 -t UTF-8 -o file.input > file_utf8
# iconv -l                           # List known coded character sets

Without the -f option, iconv will use the local char-set, which is usually fine if the document displays well.

Unix - DOS newlines

Convert DOS (CR/LF) to Unix (LF) newlines within a Unix shell. See also dos2unix and unix2dos if you have them.

# sed 's/.$//' dosfile.txt > unixfile.txt

Convert Unix to DOS newlines within a Windows environment. Use sed from mingw or cygwin.

# sed -n p unixfile.txt > dosfile.txt

PDF to Jpeg and concatenate PDF files

Convert a PDF document with gs (GhostScript) to jpeg (or png) images for each page. Also much shorter with convert (from ImageMagick or GraphicsMagick).

# gs -dBATCH -dNOPAUSE -sDEVICE=jpeg -r150 -dTextAlphaBits=4 -dGraphicsAlphaBits=4 \
-dMaxStripSize=8192 -sOutputFile=unixtoolbox_%d.jpg unixtoolbox.pdf
# convert unixtoolbox.pdf unixtoolbox-%03d.png
# convert *.jpeg images.pdf          # Create a simple PDF with all pictures

Ghostscript can also concatenate multiple pdf files into a single one.

# gs -q -sPAPERSIZE=a4 -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -sOutputFile=all.pdf \
file1.pdf file2.pdf ...              # On Windows use '#' instead of '='

Convert video

Compress the Canon digicam video with an mpeg4 codec and repair the crappy sound.

# mencoder -o videoout.avi -oac mp3lame -ovc lavc -srate 11025 \
-channels 1 -af-adv force=1 -lameopts preset=medium -lavcopts \
vcodec=msmpeg4v2:vbitrate=600 -mc 0 vidoein.AVI

Copy an audio cd

The program cdparanoiahttp://xiph.org/paranoia/ can save the audio tracks (FreeBSD port in audio/cdparanoia/), oggenc can encode in Ogg Vorbis format, lame converts to mp3.

# cdparanoia -B                      # Copy the tracks to wav files in current dir
# lame -b 256 in.wav out.mp3         # Encode in mp3 256 kb/s
# for i in *.wav; do lame -b 256 $i `basename $i .wav`.mp3; done
# oggenc in.wav -b 256 out.ogg       # Encode in Ogg Vorbis 256 kb/s

Printing

Print with lpr

# lpr unixtoolbox.ps                 # Print on default printer
# export PRINTER=hp4600              # Change the default printer
# lpr -Php4500 #2 unixtoolbox.ps     # Use printer hp4500 and print 2 copies
# lpr -o Duplex=DuplexNoTumble ...   # Print duplex along the long side
# lpr -o PageSize=A4,Duplex=DuplexNoTumble ...
# lpq                                # Check the queue on default printer
# lpq -l -Php4500                    # Queue on printer hp4500 with verbose
# lprm -                             # Remove all users jobs on default printer
# lprm -Php4500 3186                 # Remove job 3186. Find job nbr with lpq
# lpc status                         # List all available printers
# lpc status hp4500                  # Check if printer is online and queue length

Databases

PostgreSQL

Change root or a username password

# psql -d template1 -U pgsql
> alter user pgsql with password 'pgsql_password';  # Use username instead of "pgsql"

Create user and database

The commands createuser, dropuser, createdb and dropdb are convenient shortcuts equivalent to the SQL commands. The new user is bob with database bobdb ; use as root with pgsql the database super user:

# createuser -U pgsql -P bob         # -P will ask for password
# createdb -U pgsql -O bob bobdb     # new bobdb is owned by bob
# dropdb bobdb                       # Delete database bobdb
# dropuser bob                       # Delete user bob

The general database authentication mechanism is configured in pg_hba.conf

Grant remote access

The file $PGSQL_DATA_D/postgresql.conf specifies the address to bind to. Typically listen_addresses = '*' for Postgres 8.x.
The file $PGSQL_DATA_D/pg_hba.conf defines the access control. Examples:

# TYPE  DATABASE    USER        IP-ADDRESS        IP-MASK          METHOD
host    bobdb       bob        212.117.81.42     255.255.255.255   password
host    all         all        0.0.0.0/0                           password

Backup and restore

The backups and restore are done with the user pgsql or postgres. Backup and restore a single database:

# pg_dump --clean dbname > dbname_sql.dump
# psql dbname <> Backup and restore all databases (including users): # pg_dumpall --clean > full.dump
# psql -f full.dump postgres
 In this case the restore is started with the database postgres which is better when reloading an empty cluster.  MySQL
 Change mysql root or username password
 Method 1
 # /etc/init.d/mysql stop
or
# killall mysqld
# mysqld --skip-grant-tables
# mysqladmin -u root password 'newpasswd'
# /etc/init.d/mysql start
 Method 2
 # mysql -u root mysql
mysql> UPDATE USER SET PASSWORD=PASSWORD("newpassword") where user='root';
mysql> FLUSH PRIVILEGES;                           # Use username instead of "root"
mysql> quit
 Create user and database
 # mysql -u root mysql
mysql> CREATE DATABASE bobdb;
mysql> GRANT ALL ON *.* TO 'bob'@'%' IDENTIFIED BY 'pwd'; # Use localhost instead of %
                                            # to restrict the network access
mysql> DROP DATABASE bobdb;                        # Delete database
mysql> DROP USER bob;                              # Delete user
mysql> DELETE FROM mysql.user WHERE user='bob and host='hostname'; # Alt. command
mysql> FLUSH PRIVILEGES;
 Grant remote access
 Remote access is typically permitted for a database, and not all databases. The file /etc/my.cnf contains the IP address to bind to. Typically comment the line bind-address = out. # mysql -u root mysql
mysql> GRANT ALL ON bobdb.* TO bob@'xxx.xxx.xxx.xxx' IDENTIFIED BY 'PASSWORD';
mysql> REVOKE GRANT OPTION ON foo.* FROM bar@'xxx.xxx.xxx.xxx';
mysql> FLUSH PRIVILEGES;                  # Use 'hostname' or also '%' for full access
 Backup and restore
 Backup and restore a single database: # mysqldump -u root -psecret --add-drop-database dbname > dbname_sql.dump
# mysql -u root -psecret -D dbname <> Backup and restore all databases: # mysqldump -u root -psecret --add-drop-database --all-databases > full.dump
# mysql -u root -psecret <>Here is "secret" the mysql root password, there is no space after -p. When the -p option is used alone (w/o password), the password is asked at the command prompt. SQLite
 SQLitehttp://www.sqlite.org is a small powerfull self-contined, serverless, zero-configuration SQL database. Dump and restore
It can be useful to dump and restore an SQLite database. For example you can edit the dump file to change a column attribute or type and then restore the database. This is easier than messing with SQL commands. Use the command sqlite3 for a 3.x database. # sqlite database.db .dump > dump.sql              # dump
# sqlite database.db < class="cmt"># restore
 Convert 2.x to 3.x database
 sqlite database_v2.db .dump | sqlite3 database_v3.db

Disk Quota

A disk quota allows to limit the amount of disk space and/or the number of files a user or (or member of group) can use. The quotas are allocated on a per-file system basis and are enforced by the kernel.

Linux setup

The quota tools package usually needs to be installed, it contains the command line tools.
Activate the user quota in the fstab and remount the partition. If the partition is busy, either all locked files must be closed, or the system must be rebooted. Add usrquota to the fstab mount options, for example:

/dev/sda2     /home    reiserfs     rw,acl,user_xattr,usrquota 1 1
# mount -o remount /home
# mount                              # Check if usrquota is active, otherwise reboot

Initialize the quota.user file with quotacheck.

# quotacheck -vum /home
# chmod 644 /home/aquota.user        # To let the users check their own quota

Activate the quota either with the provided script (e.g. /etc/init.d/quotad on SuSE) or with quotaon:

quotaon -vu /home

Check that the quota is active with:

quota -v

FreeBSD setup

The quota tools are part of the base system, however the kernel needs the option quota. If it is not there, add it and recompile the kernel.

options QUOTA

As with Linux, add the quota to the fstab options (userquota, not usrquota):

/dev/ad0s1d    /home    ufs     rw,noatime,userquota    2  2
# mount /home                        # To remount the partition

Enable disk quotas in /etc/rc.conf and start the quota.

# grep quotas /etc/rc.conf
enable_quotas="YES"                  # turn on quotas on startup (or NO).
check_quotas="YES"                   # Check quotas on startup (or NO).
# /etc/rc.d/quota start

Assign quota limits

The quotas are not limited per default (set to 0). The limits are set with edquota for single users. A quota can be also duplicated to many users. The file structure is different between the quota implementations, but the principle is the same: the values of blocks and inodes can be limited. Only change the values of soft and hard. If not specified, the blocks are 1k. The grace period is set with edquota -t. For example:

# edquota -u colin

Linux

Disk quotas for user colin (uid 1007):
Filesystem         blocks       soft       hard     inodes     soft     hard
/dev/sda8            108       1000       2000          1        0        0

FreeBSD

Quotas for user colin:
/home: kbytes in use: 504184, limits (soft = 700000, hard = 800000)
inodes in use: 1792, limits (soft = 0, hard = 0)

For many users

The command edquota -p is used to duplicate a quota to other users. For example to duplicate a reference quota to all users:

# edquota -p refuser `awk -F: '$3 > 499 {print $1}' /etc/passwd`
# edquota -p refuser user1 user2     # Duplicate to 2 users

Checks

Users can check their quota by simply typing quota (the file quota.user must be readable). Root can check all quotas.

# quota -u colin                     # Check quota for a user
# repquota /home                     # Full report for the partition for all users

Shells

Most Linux distributions use the bash shell while the BSDs use tcsh, the bourne shell is only used for scripts. Filters are very useful and can be piped:

grep Pattern matching
sed Search and Replace strings or characters
cut Print specific columns from a marker
sort Sort alphabetically or numerically
uniq Remove duplicate lines from a file

For example used all at once:

# ifconfig | sed 's/  / /g' | cut -d" " -f1 | uniq | grep -E "[a-z0-9]+" | sort -r
# ifconfig | sed '/.*inet addr:/!d;s///;s/ .*//'|sort -t. -k1,1n -k2,2n -k3,3n -k4,4n

The first character in the sed pattern is a tab. To write a tab on the console, use ctrl-v ctrl-tab.

bash

Redirects and pipes for bash and sh:

# cmd 1> file                         # Redirect stdout to file.
# cmd 2> file                         # Redirect stderr to file.
# cmd 1>> file                        # Redirect and append stdout to file.
# cmd &> file                         # Redirect both stdout and stderr to file.
# cmd >file 2>&1                      # Redirects stderr to stdout and then to file.
# cmd1 | cmd2                         # pipe stdout to cmd2
# cmd1 2>&1 | cmd2                    # pipe stdout and stderr to cmd2

Modify your configuration in ~/.bashrc (it can also be ~/.bash_profile). The following entries are useful, reload with ". .bashrc".

# in .bashrc
bind '"\e[A"':history-search-backward # Use up and down arrow to search
bind '"\e[B"':history-search-forward  # the history. Invaluable!
set -o emacs                          # Set emacs mode in bash (see below)
set bell-style visible                # Do not beep, inverse colors
# Set a nice prompt like [user@host]/path/todir>
PS1="\[\033[1;30m\][\[\033[1;34m\]\u\[\033[1;30m\]"
PS1="$PS1@\[\033[0;33m\]\h\[\033[1;30m\]]\[\033[0;37m\]"
PS1="$PS1\w\[\033[1;30m\]>\[\033[0m\]"

# To check the currently active aliases, simply type alias
alias  ls='ls -aF'                    # Append indicator (one of */=>@|)
alias  ll='ls -aFls'                  # Listing
alias  la='ls -all'
alias ..='cd ..'
alias ...='cd ../..'
export HISTFILESIZE=5000              # Larger history
export CLICOLOR=1                     # Use colors (if possible)
export LSCOLORS=ExGxFxdxCxDxDxBxBxExEx

tcsh

Redirects and pipes for tcsh and csh (simple > and >> are the same as sh):

# cmd >& file                         # Redirect both stdout and stderr to file.
# cmd >>& file                        # Append both stdout and stderr to file.
# cmd1 | cmd2                         # pipe stdout to cmd2
# cmd1 |& cmd2                        # pipe stdout and stderr to cmd2

The settings for csh/tcsh are set in ~/.cshrc, reload with "source .cshrc". Examples:

# in .cshrc
alias  ls      'ls -aF'
alias  ll      'ls -aFls'
alias  la      'ls -all'
alias  ..      'cd ..'
alias  ...     'cd ../..'
set   prompt    = "%B%n%b@%B%m%b%/> " # like user@host/path/todir>
set   history   =  5000
set   savehist  = ( 6000 merge )
set   autolist                        # Report possible completions with tab
set   visiblebell                     # Do not beep, inverse colors

# Bindkey and colors
bindkey -e     Select Emacs bindings  # Use emacs keys to edit the command prompt
bindkey -k up history-search-backward # Use up and down arrow to search
bindkey -k down history-search-forward
setenv CLICOLOR 1                     # Use colors (if possible)
setenv LSCOLORS ExGxFxdxCxDxDxBxBxExEx

The emacs mode enables to use the emacs keys shortcuts to modify the command prompt line. This is extremely useful (not only for emacs users). The most used commands are:

C-a Move cursor to beginning of line
C-e Move cursor to end of line
M-b Move cursor back one word
M-f Move cursor forward one word
M-d Cut the next word
C-w Cut the last word
C-u Cut everything before the cursor
C-k Cut everything after the cursor (rest of the line)
C-y Paste the last thing to be cut (simply paste)
C-_ Undo

Note: C- = hold control, M- = hold meta (which is usually the alt or escape key).

Scripting

Basics | Script example | sed/useful commands

The Bourne shell (/bin/sh) is present on all Unix installations and scripts written in this language are (quite) portable; man 1 sh is a good reference.

Basics

Variables and arguments

Assign with variable=value and get content with $variable

MESSAGE="Hello World"                        # Assign a string
PI=3.1415                                    # Assign a decimal number
N=8
TWON=`expr $N * 2`                           # Arithmetic expression (only integers)
TWON=$(($N * 2))                             # Other syntax
TWOPI=`echo "$PI * 2" | bc -l`               # Use bc for floating point operations
ZERO=`echo "c($PI/4)-sqrt(2)/2" | bc -l`

The command line arguments are

$0, $1, $2, ...                              # $0 is the command itself
$#                                           # The number of arguments
$*                                           # All arguments (also $@)

Special Variables

$                                           # The current process ID
$?                                           # exit status of last command
command
if [ $? != 0 ]; then
echo "command failed"
fi
mypath=`pwd`
mypath=${mypath}/file.txt
echo ${mypath##*/}                           # Display the filename only
echo ${mypath%%.*}                           # Full path without extention
var2=${var:=string}                          # Use var if set, otherwise use string
                                      # assign string to var and then to var2.

Constructs

for file in `ls`
do
echo $file
done

count=0
while [ $count -lt 5 ]; do
echo $count
sleep 1
count=$(($count + 1))
done

myfunction() {
find . -type f -name "*.$1" -print       # $1 is first argument of the function
}
myfunction "txt"

Generate a file

MYHOME=/home/colin
cat > testhome.sh << class="cmt"># All of this goes into the file testhome.sh
if [ -d "$MYHOME" ] ; then
echo $MYHOME exists
else
echo $MYHOME does not exist
fi
_EOF
sh testhome.sh

Bourne script example

As a small example, the script used to create a PDF booklet from this xhtml document:

#!/bin/sh
# This script creates a book in pdf format ready to print on a duplex printer
if [ $# -ne 1 ]; then                        # Check the argument
echo 1>&2 "Usage: $0 HtmlFile"
exit 1                                     # non zero exit if error
fi

file=$1                                      # Assign the filename
fname=${file%.*}                             # Get the name of the file only
fext=${file#*.}                              # Get the extension of the file

prince $file -o $fname.pdf                   # from www.princexml.com
pdftops -paper A4 -noshrink $fname.pdf $fname.ps # create postscript booklet
cat $fname.ps |psbook|psnup -Pa4 -2 |pstops -b "2:0,1U(21cm,29.7cm)" > $fname.book.ps

ps2pdf13 -sPAPERSIZE=a4 -sAutoRotatePages=None $fname.book.ps $fname.book.pdf
                                      # use #a4 and #None on Windows!
exit 0                                       # exit 0 means successful

Some sed commands

sed 's/string1/string2/g'                    # Replace string1 with string2
sed -i 's/wroong/wrong/g' *.txt              # Replace a recurring word with g
sed 's/\(.*\)1/\12/g'                        # Modify anystring1 to anystring2
sed '//,/<\/p>/d' t.xhtml                 # Delete lines that start with 

                                      # and end with 

sed '/ *#/d; /^ *$/d'                        # Remove comments and blank lines
sed 's/[ \t]*$//'                            # Remove trailing spaces (use tab as \t)
sed 's/^[ \t]*//;s/[ \t]*$//'                # Remove leading and trailing spaces
sed 's/[^*]/[&]/'                            # Enclose first char with [] top->[t]op

Some useful commands

sort -t. -k1,1n -k2,2n -k3,3n -k4,4n         # Sort IPv4 ip addresses
echo 'Test' | tr '[:lower:]' '[:upper:]'     # Case conversion
echo foo.bar | cut -d . -f 1                 # Returns foo
PID=$(ps | grep script.sh | grep bin | awk '{print $1}')    # PID of a running script
PID=$(ps axww | grep [p]ing | awk '{print $1}')             # PID of ping (w/o grep pid)
IP=$(ifconfig $INTERFACE | sed '/.*inet addr:/!d;s///;s/ .*//')   # Linux
IP=$(ifconfig $INTERFACE | sed '/.*inet /!d;s///;s/ .*//')        # FreeBSD
if [ `diff file1 file2 | wc -l` != 0 ]; then [...] fi       # File changed?
cat /etc/master.passwd | grep -v root | grep -v \*: | awk -F":" \ # Create http passwd
'{ printf("%s:%s\n", $1, $2) }' > /usr/local/etc/apache2/passwd

testuser=$(cat /usr/local/etc/apache2/passwd | grep -v \    # Check user in passwd
root | grep -v \*: | awk -F":" '{ printf("%s\n", $1) }' | grep ^user$)

Programming

C basics

strcpy(newstr,str)                        /* copy str to newstr */
expr1 ? expr2 : expr3                     /* if (expr1) expr2 else expr3 */
x = (y > z) ? y : z;                      /* if (y > z) x = y; else x = z; */
int a[]={0,1,2};                          /* Initialized array (or a[3]={0,1,2}; */
int a[2][3]={{1,2,3},{4,5,6}};            /* Array of array of ints */
int i = 12345;                            /* Convert in i to char str */
char str[10];
sprintf(str, "%d", i);

C example

A minimal c program simple.c:

#include 
main() {
int number=42;
printf("The answer is %i\n", number);
}

Compile with:

# gcc simple.c -o simple
# ./simple
The answer is 42

C++ basics

*pointer                                  // Object pointed to by pointer
&obj                                      // Address of object obj
obj.x                                     // Member x of class obj (object obj)
pobj->x                                   // Member x of class pointed to by pobj
                                   // (*pobj).x and pobj->x are the same

C++ example

As a slightly more realistic program in C++, let's create a class in its own header (IPv4.h) and implementation (IPv4.cpp) and create a program which uses the class functionality. The class has a member to convert an IP address in integer format to the known quad format. This is a minimal c++ program with a class and multi-source compile.

IPv4 class

IPv4.h:

#ifndef IPV4_H
#define IPV4_H
#include 

namespace GenericUtils {                          // create a namespace
class IPv4 {                                      // class definition
public:
IPv4();
~IPv4();
std::string IPint_to_IPquad(unsigned long ip);// member interface
};
} //namespace GenericUtils
#endif // IPV4_H

IPv4.cpp:

#include "IPv4.h"
#include 
#include 
using namespace std;                              // use the namespaces
using namespace GenericUtils;

IPv4::IPv4() {}                                   // default constructor/destructor
IPv4::~IPv4() {}
string IPv4::IPint_to_IPquad(unsigned long ip) {  // member implementation
    ostringstream ipstr;                          // use a stringstream
    ipstr << ((ip &0xff000000) >> 24)             // Bitwise right shift
          << "." << ((ip &0x00ff0000) >> 16)
   << "." << ((ip &0x0000ff00) >> 8)
   << "." << ((ip &0x000000ff));    return ipstr.str();
}

The program simplecpp.cpp

#include "IPv4.h"
#include 
#include 
using namespace std;

int main (int argc, char* argv[]) {
string ipstr;                                 // define variables
    unsigned long ipint = 1347861486;             // The IP in integer form
GenericUtils::IPv4 iputils;                   // create an object of the class
    ipstr = iputils.IPint_to_IPquad(ipint);       // call the class member
    cout << class="cmt">// print the result

return 0;
}

Compile and execute with:

# g++ -c IPv4.cpp simplecpp.cpp                # Compile in objects
# g++ IPv4.o simplecpp.o -o simplecpp.exe      # Link the objects to final executable
# ./simplecpp.exe
1347861486 = 80.86.187.238

Use ldd to check which libraries are used by the executable and where they are located. This command is also used to check if a shared library is missing or if the executable is static.

# ldd /sbin/ifconfig

Simple Makefile

The corresponding minimal Makefile for the multi-source program is shown below. The lines with instructions must begin with a tab! The back slash "\" can be used to cut long lines.

CC = g++
CFLAGS = -O
OBJS = IPv4.o simplecpp.o

simplecpp: ${OBJS}
${CC} -o simplecpp ${CFLAGS} ${OBJS}
clean:
rm -f ${TARGET} ${OBJS}

Online Help

Documentation

Linux Documentation	en.tldp.org
Linux Man Pages	www.linuxmanpages.com
Linux commands directory	www.oreillynet.com/linux/cmd
Linux doc man howtos	linux.die.net
FreeBSD Handbook	www.freebsd.org/handbook
FreeBSD Man Pages	www.freebsd.org/cgi/man.cgi
FreeBSD user wiki	www.freebsdwiki.net
Solaris Man Pages	docs.sun.com/app/docs/coll/40.10

Other Unix/Linux references

Rosetta Stone for Unix	bhami.com/rosetta.html (a Unix command translator)
Unix guide cross reference	unixguide.net/unixguide.shtml
Linux commands line list	www.linuxguide.it/commands_list.php
Short Linux reference	www.pixelbeat.org/cmdline.html

That's all folks!

Обо всём остальном...

2009-04-21T05:52:00.001-07:00

1. Прошивка PSP3000 :
!!!Всё что вы проделаете по следующей инструкции вы делаете на свой страх и риск,
автор не несёт никакой ответственности за проделанные вами действия(или за программы здесь указанные) и повлекшие в связи с ними последствия !!!

#Прошивка должна быть оффициальная, версии 5.03
Предварительно сбрасываются настройки ПСП :
System Setting > Restore Default Settings
System Setting > System Language > English
System Setting > Character Set > US
Theme Settings > Theme > Classic
System Settings > Format Memory Stick
#ВСЕ НИЖЕУКАЗАННЫЕ ПРОГИ ИЩУТСЯ И НАХОДЯТСЯ В ГУГЛЕ!
#Итак поехали :
1. Подключаем ПСП к компу, запускаем программу EZ503HenSLIMversion, жмём Install, должны скопироваться файлики, выключаем ПСП.
2. Вытаскиваем Flash-Memory, потом вставляем Flash-Memory и включаем ПСП.
3. На ПСП, заходим в папку Fotos/ChichHEN и ЖДЁМ!!! ПСП должна перезагрузиться.
4. Заходим в System Settings > System Information смотрим версию прошивки, если в имени присутствует ChichHEN то переходим к следующему шагу, если нет то повторяем пункт 3 пока не получится.
5. Подключаем ПСП к компу, на компе из архива genforhen.rar запускаем Launch.exe выставляем параметры : "PSP3000,FULL,YES,Drive:(путь к флешке на ПСП)F", давим Start и ждём пока скопируются файлики секунд 5-10.
5. Отсоединям ПСП и заходим на ней в Games и запускаем InstallerLoader
6. Вылезет черное окошко и спросит: "что нажать ?" : если запускаете InstallerLoader в первый раз то жмём R или L, если второй и более то жмём О и ещё раз О для выхода, потом перезагрузка и.... и всё....
7. ПСП перегружается , жмём SELECT и в строке UMD ISO MODE ставим Sony NP9660 и ещё раз Select - это для лучшей восприимчивости к образам...
8. Создаём в корне флешки папку ISO и копируем туда образы игр.
Поддерживаются ISO CSO PSX.

2.Права доступа к папкам windows
a. Проводник -> Сервис -> Свойства папки... -> Вид -> Использовать простой общий доступ к файлам (рекомендуется) снять галочку -> Ok
b. Проводник -> Правой кнопкай мыши на объект Общий доступ и безопасность -> Безопасность -> Дополнительно -> перейти на вкладку Владелец -> изменить владельца на: выбрали и здесь же установили галочку на Заменить владельца субконтейнеров и объектов -> Применить
c. -> Дополнительно -> теперь вкладка Разрешения -> Элементы разрешения добавить нужного пользователя и уровень доступа, снять галочку Наследовать от родительского объекта..., установить галочку Заменить разрешения для всех дочерных объектов... -> ОК

Red Keys.
c1e3-dfe1-c16f-93df
1c05-3f81-1c89-733f
04eb-da36-0467-93da
60c5-3e75-6049-733e
f2d3-de11-f25f-93de
2cb5-b541-22dd-8a3b
01b7-78b3-56e9-1fcd
16ca-96a6-94e8-b58a
8561-61d1-2fc0-e5fe
18c6-ecab-21f0-7597
645d-e430-65d6-1be4
33f2-ce52-3279-32ce
d6d9-4989-d752-b349
6e97-439c-6f1c-bb43
b13d-ad99-b0b6-53ad
6b50-eb12-6adb-12eb
321e-57a1-3395-aa57
3c05-d0e9-3d8e-2bd0
9270-acb7-93fb-52ac
4073-637e-41f8-9b63

EMC Networker

2009-04-21T04:05:00.000-07:00

1.Установка/удаление на SunSolaris:
pkginfo | grep LGT
pkgrm LGTOclnt
nsrnmoadmin -r list
cd $ORACLE_HOME; cd lib; ln -s /usr/lib/libnwora.so libobk.so
pkgadd -d .

2.Запуск сервисов:
Solaris, Linux, IRIX /etc/init.d/networker start
HP-UX /sbin/init.d/networker start
HP Tru64 UNIX /sbin/init.d/NSRstartstop start
nsradmin
AIX /etc/rc.nsr

3.Пути к конфигам для бакапа Оракл:
ls -la /usr/sbin/nsrnmo1
ls -la /var/scripts/NMO/develop_incr0_2ch.sh

4.Настройка бакапа при помощи RMAN :
1.ставим клиента,
2.создаём скрипты запуска RMAN:
/var/scripts/NMO/ibb_incr0_4ch.sh (RMAN:/var/scripts/NMO/ibb_incr0_4ch.sh ) - full
/var/scripts/NMO/ibb_incr1_4ch.sh (RMAN:/var/scripts/NMO/ibb_incr1_4ch.sh ) - incr
3.правим, копируем, создаём для каждого типа задачи:
/usr/sbin/nsrnmo№:
ORACLE_HOME=/disk3/oracle/app/oracle/product/ 9.2.0.8/
ORACLE_SID=$
PATH=/usr/sbin:/usr/bin:/bin:/sbin
NSR_RMAN_ARGUMENTS="msglog ’/nsr/applogs/msglog.log’ append"
4.проверить настройки в базе :
Создать пользователя для осуществления бэкапов:
CREATE USER nsradmin IDENTIFIED BY "ваш_пароль"
DEFAULT TABLESPACE "TOOLS"
TEMPORARY TABLESPACE "TEMP"
QUOTA UNLIMITED ON "TOOLS";
GRANT CREATE SESSION TO nsradmin;
GRANT SYSDBA TO nsradmin;
Настроить RMAN:
RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON
5.проверить настройки nsrnmo:
# nsrnmoadmin -r list
NSR_NWPATH=/usr/sbin
NSR_ORACLECAT_MODE=undetermined
NSR_REMOVE_ON_FAILURE=FALSE
NSR_ORACLE_NLS_LANG=
NSR_ORACLECAT_LOG_FILE=
NSR_ORACLECAT_DEBUG_FILE=
NSR_TMPDIR=
NSR_BUNDLING=disabled
NSR_INCR_EXPIRATION=disabled
6.проверить политики хранения,нодов,права доступа,лицензию

5.Вывод списка лент на которые произвёлся бакап вчера:
mminfo -avr volume -t yesterday | nawk '{ system("nsrjb | grep "$0)}'

6. Вывод списка бакапов по признаку уровня, имени сейв сета, пула:
mminfo -v -q "level=full, name=MSSQL:"
mminfo -v -q "pool=Default Clone" | awk '{print $2}' | sort | uniq

7.Выгрузка лент по SID`у на ленты "Default Clone":
nsrstage -m -b "Default Clone" -S 3924125103

8.Восстанавливаем CFI:
nsrck -L7 [client_name]

9.Проверяем лицензии:
nsrlic -v

10.Читаем логи:
nsr_render_log -S 10:00 /nsr/logs/daemon.raw | grep -v Unable

11.Паралельная запись на несколько лент:
Правый клик на драйв, Properties, закладка Configuration, указываваем TargetSession-3.
Если у нас в RMAN`е к примеру копирование в 6 каналов, то бакап будет производится на 2 ленты одновременно. Вообще тут надо исходить из количества драйвов в вашей бибилиотеке, чем их больше тем меньшее значение TargetSession можно задавать и соответсвенно получать меньшие затраты по времени.

12.Необходимые настройки после подключения новой библиотеки :
1)Правый клик на верхнюю кладку вашего сервера, заходим в Properties, и вводим значение во вкладке Setup/Parallelism полученное из TargetSession*№Drives.
2)Правый клик на библиотеку, Properties, закладка Configuration, ставим галочку на AutoManagement. Здесь же заходим во вкладочку Times, выстанавливаем значение IddleDeviceTimeout - 1. Библиотека готова к работе.

13.Необходимые настройки при создании группы:
Правый клик на группу, Properties, Advanced и ставим ClientRetries - 0, ставим галочки на Verbose и ManualRestart в левом нижнем окошке. Группа готова к работе.

14.Необходимые настройки драйва библиотеки :
Правый клик на драйв, Properties, Advanced и ставим Idle device timeout - 1, здесь же производиться настройка паралельной записи на несколько лент. см пункт 11.

15.Просмотр данных SaveSet на выборочном Volume:
mminfo -avV A00005L3 | grep app1
mminfo -v -q "name=/odb0/WH"

16.Удаление группы Volume:
mminfo -mv | awk '{print $1}' | grep "^I7WD" | uniq > volume.txt
while read line; do nsrmm -d -y $line; done < volume.txt

17.Если есть проблемы с host.id :
1.Потушить сервисы gst, networker
2.Удалить пакеты gst
3.Поменять hostname
4.Ребутнуть сервак, поставить и запустить gst.

18.Вывести список файлов на ленте:
1.mminfo -avot -r "volume,name,ssid,level,savetime,nsavetime" -c client_name
2.nsrinfo -t nsavetime client_name

19.Восстановить client index:
1.scanner -i -c 10.2.22.10 /dev/nst1

20.Восстановить media index:
1. Load Without Mount
2. scanner /dev/nst
3. add client,group,pool names
4. scanner -i /dev/nst
5. mminfo -avot -r "volume,name,ssid" -c client
6. recover -s networker2 -S ssid -d /

21.Tips&Trips
1. inquire -lc backupsrv.alb.kz :scan all SCSI devices
2. nsrjobd -D 1 :view debugging level 1
3.# nsradmin -p nsrexec -s nox

(alternatively, you can use: nsradmin -p 390113 -s nox)

At the nsradmin> prompt, enter the command:

delete type: NSR peer information; name: faero

And answer yes when prompted to confirm. For example, the session might resemble the following:

nsradmin> delete type: NSR peer information; name: faero
type: NSR peer information;
administrator: root, "user=root,host=nox";
name: faero;
peer hostname: faero;
Change certificate: ;
certificate file to load: ;
Delete? y
deleted resource id 17.0.83.117.0.0.0.0.210.37.85.73.0.0.0.0.10.0.0.1(1)

4.#nsraddadmin -u user=root,host=ldsun

22. Media working scripts :
1. Find duplicate medias name
#!/bin/bash
mminfo -m | awk '{print $1}' | sort | uniq -D > /usr/local/stat/dup_media.txt
mminfo -m | awk '{print $2}' | sort | uniq -D >> /usr/local/stat/dup_media.txt
cat /usr/local/stat/dup_media.txt | grep '[[:alnum:]]\{8\}' > /usr/local/stat/dup_media_count.txt
Subj="Duplicate Media Monitoring Alarm !"
Mail='name@dome.kz'
Count=`ls -l /usr/local/stat/dup_media_count.txt | awk {'print $5'}`;
File="/usr/local/stat/dup_media_count.txt"
if [ $Count -ne 0 ]; then
mailx -s "${Subj}" $Mail < ${File} -v
fi
exit 0

2. Find free medias :
#!/bin/bash
/usr/sbin/mminfo -mv | awk '{print $1,$5}' | grep undef | wc -l > /usr/local/stat/free_media.txt
Subj="Free Media Monitoring Alarm !"
Mail='name@dome.kz'
Count="cat /usr/local/stat/free_media.txt"
Report="/usr/local/stat/free_media.txt"
if [ `$Count` -lt 15 ]; then
mailx -s "${Subj}" $Mail < ${Report} -v
fi
exit 0

3. Erase expired medias :
#!/bin/bash -v
Mail='name@dome.kz'
Subj="Some problems on hostname!"
mminfo -mv | grep "expired" | awk '{print $1}' > /usr/local/stat/expired_media.txt
while read line; do
nsrmm -d -y $line;
done < /usr/local/stat/expired_media.txt

if [ $? -ne 0 ];then
mail -s "${Subj}" $Mail < /usr/local/stat/expired_media.txt -v
fi
exit 0

23.

Bash_examples

2009-04-21T03:59:00.000-07:00

1.Просмотр файла без комментариев и пустых строчек:
egrep -v "^#|^$" /etc/squid/squid.conf

2.Перевод имён файлов в нижний регистр:
ls -al | awk '{print $9}' | tr [a-z] [A-Z]

3.Выводим количество подключений на 25 порт с одного IP:
netstat -nt |grep ':25' |awk '{print $5}' |awk -F: '{print $1}' |sort -n |uniq |wc -l

4.Генерируем случайным образом пароль из 8 символов:
head -c8 /dev/random | uuencode -m - | sed -n '2s/=*$//;2p'

5.Бакап базы MySQL:
#!/bin/sh
WrkDir="/var/www/html"
BDir="/var/backup/new.name.kz"
User=root
Pass='pass'
Date=`date '+%Y-%m-%d'`
Subj="Web backup"
Mail='unixadmins@name.kz'
Bk="*.bcp"
DB_webs=(base_name)
Fs_webs=(dir_name)

if [ ! -d $BDir ]; then
mkdir $BDir
fi

find $BDir -type f -ctime +6 -exec rm -r "{}" ";"

cd ${WrkDir}

Count=${#DB_webs[*]}

/sbin/service httpd stop

for ((a=0; a < $Count; a++)); do /usr/bin/mysqldump -u${User} -p${Pass} ${DB_webs[$a]} > ${BDir}/${DB_webs[$a]}_${Date}.sql
/usr/bin/bzip2 ${BDir}/${DB_webs[$a]}_${Date}.sql
/bin/tar cpf - ${Fs_webs[$a]} | bzip2 -c > ${BDir}/${Fs_webs[$a]}_${Date}.tar.bz2
done

/sbin/service httpd start

cd ${BDir}

exit 0

6.Мониторинг с отправкой на почту :
#!/bin/bash

# crontab - 15,45 * * * *

ReportDir=/usr/local/stat/report
Hostname=`hostname`
Mail='unixadmins@name.kz'

fs=(/) # df control
maxLimit=(90) # df control
TmpFile=file.tmp

Date=`date '+%Y-%m-%d'`
Hour=`date +%H`
Min=`date +%M`

if [ ! -d $ReportDir ]; then
mkdir $ReportDir
fi

if [ $Hour -eq 23 -a $Min -eq 45 ]; then
df -h | mail -s "df from server ${HOSTNAME}" $Mail
fi

cd $ReportDir

count=${#fs[@]}

df -h ${fs[*]} | sed -n '2,$p' | tr -d '\n' > $TmpFile

while read Line; do
FileSystem="`echo $Line | awk '{print $6}'`"
Use="`echo $Line | awk '{print substr ($5, 0, length($5)-1)}'`"

for ((a=0; a <>> ${TmpFile}.00
fi
fi
done

done < $TmpFile if [ -e "${TmpFile}.00" ]; then cat ${TmpFile}.00 | mail -s "Warning from server ${HOSTNAME}" $Mail rm ${TmpFile}.00
fi rm $TmpFile

exit 0

7.Мониторинг часть 2 :
#! /bin/bash

ReportDir=/usr/local/stat/report

cd $ReportDir
echo ---------WWW File Systems Utilization Statistics--------------------- > mon.list
df -h >> mon.list
echo ---------WWW LASTLOG--------------------- >> mon.list
last -20 >> mon.list
echo ---------DIAGNOSTIC MESSAGES----- >> mon.list
tail -n 100 /var/log/messages >> mon.list
echo ---------DMESG MESSAGES---------- >> mon.list
dmesg | tail -n 60 >> mon.list
mailx -s WWW unixadmins@name.kz

exit 0

8.Копируем "на лету" с сайта образ базы MySQL и портируем на другой хостинг :

#!/bin/bash
WWW="/var/www/html"
DIR="/var/www/html/modules/general/"
BCKP="/var/backup/"
MAIL='unixadmins@name.kz'

mv $DIR/mysql.php $BCKP

cd $WWW
/bin/tar cfz $BCKP/site.tar.gz ./
mv $BCKP/mysql.php $DIR

cd $BCKP
/usr/bin/scp ./`ls -lhtr base_dump_name* | tail -1 | awk '{ print $9 }'` hosting@IP:/home/www
/usr/bin/scp ./site.tar.gz hosting@IP:/home/www
/usr/bin/ssh -l username IP "/home/www/sitecopy.sh" --->

#/home/www/sitecopy.sh :
##!/bin/bash
#cd /home/www
#tar xfz ./site.tar.gz
#bunzip2 ./base_dump_name*
#mysql -u user -ppass base_name < base_dump_name*
#rm -f ./base_dump_name*
#rm -f ./site.tar.gz
#chmod -R 755 /home/www/
#exit <---

if [ $? = 0 ]; then echo "WWW copy is OK" | mail -v $MAIL -s sitecopy else echo "WWW copy looks NOT Good!" | mail -v $MAIL -s sitecopy fi rm -f $BCKP/site.tar.gz

exit 0

9.Копируем свои бакапы куда подальше :

#!/bin/sh
#sudo /etc/init.d/sendmail start;

BDir="/var/backup/new.name.kz";
Subj="WWW Backup to CVSLinux";
Mail='unixadmins@name.kz';
Data=`date '+%Y-%m-%d'`;
Report="/usr/local/stat/report/new.scp.file";

cd $BDir;
/usr/bin/scp *_${Data}* bcp@IP:/remout/dir/;
echo "=================BACKUP FILES================" > ${Report};
/usr/bin/ssh bcp@IP ls -l /remout/dir/ >> ${Report};
mailx -s "${Subj}" $Mail < ${Report} -v #&& sleep 5 && sudo /etc/init.d/sendmail stop exit 0

10.File renamer (simple)

#!/bin/bash
# renames.sh
# basic file renamer

criteria=$1
re_match=$2
replace=$3

for i in $( ls *$criteria* );
do
src=$i
tgt=$(echo $i | sed -e "s/$re_match/$replace/")
mv $src $tgt
done
11.

LVM

2009-04-21T03:05:00.001-07:00

Описание

LVM (свежая версия LVM2) - это система управления дисковым пространством, абстрагирующаяся от физических устройств. Она позволяет эффективно использовать и легко управлять дисковым пространством. LVM обладает хорошей масштабируемостью, уменьшает общую сложность системы. У логических томов, созданных с помощью LVM, можно легко изменить размер, зашифровать, скопировать, переместить, а их названия могут нести большую смысловую нагрузку, в отличие от традиционных /dev/sda, /dev/hda...

Как это выглядит

LVM позволяет объединить несколько физических партиций в единую группу томов (или несколько групп). Внутри этой группы, независимо от количества входящих в нее физических партиций, можно создавать логические тома (logical volumes).

Проще говоря внутри LVM-партиций (pv), объединенных в одну группу (vg) вы можете создать сколько нужно логических томов (lv), причем размер их можно будет менять динамически внутри группы даже не отмонтируя тома!

Наглядно эту цепочку можно представить так:

Жесткий диск -> Физические партиции -> Группа томов -> Логическая партиция -> Файловая система

Жесткий диск разбивается на Физические партиции (hda3, hd5), они помечаются как pv (команда pvcreate), потом они все объединяются в логическую Группу томов vg (volume group) и все их место становится доступным местом внутри этой группы. Далее в группе уже создаются логические тома lv (logical volume), разделяющие между собой пространство внутри vg (Группы томов), они будут представлять собой устройства монтирования для /home, /usr и т.п. Затем Логическая партиция форматируется в конечную файловую систему (reiserfs, ext3), и монтируется в систему. Эти логические тома можно изменять в размере внутри группы, а можно расширить место в самой группе, добавив туда еще несколько физических партиций. Также потом эти тома можно зеркалировать, переносить, делать бекапы, шифровать и многое другое.

Зачем это нужно

Позже по мере работы можно добавлять новые физические партиции (отформатированные под LVM). То есть к примеру при покупке нового винчестера или создании нового раздела на старом - его можно будет отформатировать под LVM и подключить к уже существующим томам. Место для этих томов увеличится и размер любого из томов (или сразу нескольких) можно будет изменить.

Разбиение на много логических томов полезно как для защиты от переполнения (при переполнении одного раздела - вся система не становится, а продолжает работать), так и для безопасности (к примеру /tmp подмонтировать как noexec, а /etc к примеру как ro).

Более того, при LVM вы совершенно можете не заботиться о размере раздела, т.к. его можно изменить в любое время, а еще можно подключать новое "свободное место" для этих разделов даже с другого физического носителя по типу RAID-систем. А внутри создавать уже логические тома на любимой для вас файловой системе(ext2, ext3, reiserfs и пр.).

Пример работы с LVM

Загрузка модуля

modprobe dm-mod

Подготовка партиций

Подготовка физических партиций hda3 и hda6 для работы в LVM2:

pvcreate /dev/hda3 /dev/hda6

(физические разделы должны существовать и иметь тип 8E)

Создание Группы томов

Создаем группу томов с именем vg, и включаем туда физическую партицию hda3

vgcreate vg /dev/hda3

Теперь группа vg содержит ровно столько места, сколько имеет hda3

Расширение группы томов

Добавить физическую партицию hda6 к примеру к уже существующей группе vg можно так:

vgextend vg /dev/hda6

Теперь группа vg содержит уже суммарное место разделов hda3 и hda6.

Вообще авторы LVM не советуют подключать и расширять группы без надобности. Они советуют разбить винчестер на много небольших партиций (к примеру 160ГБ на 8 разделов по 20ГБ). И подключать их в группы по мере необходимости в увеличении тома, т.к. увеличить раздел всегда проще чем уменьшить его. Посему и логические тома (logical volumes) лучше начинать с малых размеров, а при необходимости - подключать новые партиции и увеличивать размер томов.

Создание логических томов

Создать логические тома для разделов к примеру:

/home 2G
/opt 2G
/tmp 1G

можно командами:

lvcreate -L2G -nhome vg
lvcreate -L2G -nopt vg
lvcreate -L1G -ntmp vg

В результате позже появятся устройства /dev/vg/home, /dev/vg/opt, /dev/vg/tmp, которые можно будет уже форматировать в файловые системы.

Увеличение размера

Увеличение размера тома

Увеличить к примеру раздел /var можно будет командой

lvextend -L+1G /dev/vg/var

если конечно вам позволяет место. Узнать о свободном месте можно командами pvs, vgs. Увеличение размера уже после отформатирования можно будет делать даже неотмонтируя устройства. Для этого надо будет собрать пакет для работы с reiserfs (или reiser4).

Увеличение размера файловой системы

После увеличения размера логического тома, следует увеличить размер файловой системы:

для ext3:

resize2fs -f /dev/vg/var

Уменьшение размера

Уменьшить размер значительно сложнее чем увеличить. По этому-то и рекомендуется изначально делать все разделы маленькими, а потом их увеличивать.

Уменьшение размера файловой системы

Тут нет online-изменения, как при увеличении. Для уменьшения размера придется файловую систему отмонтировать:

umount /dev/vg/usr

Внимание! Ни в коем случае не используйте umount -f или umount -l, если система говорит что раздел занят! Это может повредить данные при изменении размера. Лучше подождите пока он освободиться, переведите систему в readonly (mount -o remount,rw /dev/vg/var), или даже перезагрузитесь.

Затем необходимо уменьшить саму файловую систему (рекомендуется сделать бекап, обеспечить бесперебойное питание, и точно знать что свободного места больше, чем размер желаемого уменьшения).

resize_reiserfs -s-2G /dev/vg/usr

Этот процесс достаточно долгий, зависит от размера и количества файлов на файловой системе.

Уменьшение размера тома

Теперь уменьшаем сам том:

lvreduce -L-2G /dev/vg/usr

Все. Файловую систему можно примонтировать обратно:

mount -treiserfs /dev/vg/usr /usr

После уменьшения размера рекомендуется делать проверку fsck файловой системы.

Поиск существующих томов

Для поиска существующих томов (при подключении новых, или перезагрузке), можно воспользоваться командами:

vgscan
vgchange -a y
vgmknodes vg


успешно скопировано с : http://belgorod.lug.ru/wiki/index.php/LVM

Commands_by_me

2009-04-21T00:51:00.001-07:00

В данном листе будут записываться на мой взгляд наиболее интересные и полезные команды в Линукс ОС. Команды привязанные к определённому типу дистрибутива будут помечены *. Cписок готовлю по большей части для себя, но думаю и вы можете найти чтото полезное.... Итак...

1. make bzimage modules modules_install install #kernel install
2. startx #start Xserver
3. dd if=dd.img of=/dev/fd0 #create image
4. fuser -mv /mnt/cdrom #kill user process
5. tar -xf /name.tar /file #extract archive
tar -cf /home.tar /home #arch directory
tar -czf /home.tgz /home #arch directory with zip compession
tar -cjf /home.tbz /home #arch directory with bzip2 compession
tar -t /home.tar # list of files in archive
tar -pcf /home.tar /home #save permisions
6. crontab -u [user] file.cron #insert task by user
at -f file 10pm Jul 12 #commands in file will exec in 22-00 12 Jul
7. split -b[number]k name.mp3 [name] #split file
cat name .* > name.mp3 #gather file
8. lstattr;chattr #list or change additional attributes
9. insmod;lsmod;rmmod;modinfo;modprobe #work whith modules
10. mkisofs -J -r -T -o /name.iso /mnt/cdrom #create image
cdrecord -v -eject speed=24 dev=0,0,0 /name.iso #burn image
11. chmod --reference=/file_A /file_B #copy rights
12. lokkit #iptables setup RH*
13. export LANG=en_US.UTF-8 #eng lang rh4.* in CLI
export LANG=ru_RU.UTF-8 #rus lang in CLI
export LANG=ru_RU.CP1251 #rus lang in CLI
14. rpm -ql [name] more #list of all packets
rpm -qc rpm.name #list of conf files of packet
rpm -qd rpm.name #list docs of packet
rpm -qf file.name #whose file
rpm -v rpm #check rpm before install
rpm -Uvh ftp://server1/pack_name #install by ftp
rpm -Uvh http://server1/pack_name #may NOT be install
rpm -i #install packet with save old
rpm -U #upgrade packet, remove old and install new
rpm -f #upgrade packet only if its already install
15. echo "text" | mail address@rcpt -s "head" #send e-mail
16. netstat -ntp #connections used programs
netstat -a #show all sockets
17. RAID create:
part raid.01 --size=600 --ondisk=sda
part raid.02 --size=600 --ondisk=sdb
part swap --size=128 --ondisk=sda
part swap --size=128 --ondisk=sdb
part raid.11 --size=1 --grow --ondisk=sda
part raid.12 --size=1 --grow --ondisk=sdb
raid / --level=1 --device=md0 raid.01. raid.02
raid /us --level=5 --device=md1 raid.11 raid.12
18. Network settings:
ifconfig eth0:1 192.168.0.1 mask 255.255.255.0 up
route add default gw 192.168.1.1
route add 0.0.0.0 gw 192.168.1.1
route add -net[-host] 172.20.0.0 netmask 255.255.0.0 gw 172.21.1.1
route add -net 10.0.0.0/8 gw 10.0.0.1
19. echo 1 > /proc/sys/net/ipv4/ip-forward #switch on forwarding
20. ethtool eth0 #link config
ethtool -s ethX autoneg off speed 1000 duplex full #ethernet settings
21. add in /boot/grub/grub.conf opposite kernel line:
vga=791 video=vesafb:mtrr,ywrap
22. Adding font to Xserver:
copy fonts to /usr/X11R6/lib/X11/fonts/TTF
edit /etc/X11/xorg.conf
restart Xserver
23. Check TLS/SSL connections:
$openssl
OpenSSL> s_client -host localhost -port 956
24. sendmail -d0 #debuging sendmail
25. TCPwrappers services names in /etc/services:
in.telnetd: 192.168.0.1
sshd, gdm: 192.168.0.2
vsftpd: 192.168.0.3, 192.168.0.4
portmap: www.redhat.com, example.com
$ldd `which sendmail` | grep libwrap #check TCPwrappers compatibility
26. iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128 #transparent proxy
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -o eth0 -j SNAT --to-source 212.23.98.45
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0-j MASQUERADE #masquerading
27. /etc/security/* #limit many logging options
28. ether-wake -i eth1 -p 192.168.1.6 #wake up host
29. IGM:
/usr/local/stc/limit/* #logrotate and rotate scripts
squidguard update:
touch /var/lib/squidguard/mail/domain.diff
add +host.name in domains.diff
squidguard -u
30. $head -c8 /dev/random | uuencode -m - | sed -n '2s/=*$//;2p' #generate custom password
31. find . -maxdepth 1 -type d -print | xargs du -sh | sort -rn #recurse view size of curent durectory
find . -name '*.txt' -maxdepth 1 | xargs grep -l fedora | xargs wc -l
32. Find examples:
find . -type f -exec chmod 644 {} \;
find . -type d -exec chmod 755 {} \;
find . -uid 0 -exec chown 500 {} \;
find . -atime +365 | cpio -o > /mnt/backup/home-backup.cpio
find . -type f -mtime +7 -exec rm {} \;
find . -iname file.txt #insensitive find
find . -user [name] -group [name]
find . -perm 777 -exec chmod 644 {} \;
find . -size +1024000 -ok gzip {} \;
find . -ctime -3 -user chill -ok mv {}.org \;
find . -name "*.conf" -exec cp {} {}.org \;
find . -perm +o+w -exec chmod o-w {} \;
find . -atime[-amin,-anewer] #when file was last read
find . -mtime[-mmin,-mnewer] #when file data last changed
find . -ctime[-cmin,-cnewer] #when file metadata last changed
-10 less than 10 days ago
+10 more than 10 days ago
33. iostat -x #disks status
34. /etc/default/useradd #users login correction
/etc/login.defs #specify password expiration for new accounts
35. arping -I eth0 10.0.0.2 #see another mac-address
36. sa-learn --spam --mbox /var/mail/spam #learn assassin to kill
37. tcpdump port 443 > file.log #logging tcp
38. mount.cifs //Win2003/share /mnt/mydir -o user=name%pass, rw #mount share from Windows
39. setfacl -m u:name:rw /home/name #ACL
40. chage -l [user] #users pass options info
41. :%s/test/tester/g #replace test by tester
42. pwconv #create shadow from /etc/passwd
43. ssh-keygen -t dsa -N ''
cat ~/.ssh/id_dsa.pub | ssh you@host-server "cat - >> ~/.ssh/authorized_keys2" #authorized by public key
44.nmap -sT -O localhost #see open services
45.$ftp localhost
>get some.file
quit
46. nice myprog
renice 15 -p PID #progs cpu prioritet
47. tzcelect #TIMEZONE select
48. ssh -X hostB[user@hostB]$ xterm & #remote Xterm
in /etc/ssh/sshd_conf
AllowUsers user
AllowGroups user
49. mkdir -p -m 0755 work/{inbox,outbox,sent}/{1,2,3} #recurcive create
50. SELinux :
getsebool -a
setsebool
getenforce -a
setenforce
51. KeyForRH5 :
645d-e430-65d6-1be4
33f2-ce52-3279-32ce
d6d9-4989-d752-b349
6e97-439c-6f1c-bb43
b13d-ad99-b0b6-53ad
52. cat /proc/scsi/qla2xxx/
scsi-qla0-adapter-port=2100001b320aaf95; #see WWN
53. dd if=/dev/zero of=./sequre_disk bs=1024 count=50000 #crt file 50Mb
54. аутентификация - проверка подлинности пользователя
авторизация - проверки прав доступа пользователя к объектам системы
55.cat /dev/vcs1 #see another console
56.export DISPLAY=10.1.10.108:0.0 #export display
57. fcinfo hba-port #Solaris HBA info
58. Samba authentication types :

Режим доступа пользователя (User-mode security): когда доступ к ресурсам Samba-сервера предоставляется в локальной рабочей группе по имени пользователя и паролю.
Режим доступа ресурса (Share-mode security): когда доступ к каждому ресурсу на Samba-сервере осуществляется по паролю, присущему этому данному ресурсу, а не пользователям.

59.

export HISTCONTROL=ignorespace #DONT save commands start at "space"
60.

%_query_all_fmt %{n}-%{v}-%{r}.%{arch} #In

/etc/rpm/macros.prelink -for see arch.

61./usr/sbin/syslogd -ss -l /chroot/httpd/dev/log #Attach log to syslogd
62.HTTP_PROXY="http://login:password@xxx.xxx.xx.xx:yyyy"
export HTTP_PROXY #Proxy setting in system
63.Yum local repository:
cat /etc/yum.repos.d/local.repo
[localrepo]
name=local
baseurl=file:///media/localrepo/Server
enabled=1
gpgcheck=0
#createrepo /media/localrepo/Server
64.ssh -X user@hostB xterm &
65.MTU
#ip link set dev eth0 mtu 1350
# ip link list
66.watch -n 1 -d free
67.